CRUX VRFBM-77C Manual

CRUX Not categorized VRFBM-77C

Read below đź“– the manual in Italian for CRUX VRFBM-77C (12 pages) in the Not categorized category. This guide has been helpful for 20 people and has been rated 4.5 stars on average by 2 users

Page 1/12
• With OE type Dynamic Parking Guide Lines
• On-screen display and setup
• 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,
rear-view camera, reverse gear)
• Rear-view camera input
• Front camera input
• Front camera input can also be used as an Auxiliary Video Input
• Automatic switching to rear-view camera input on engagement of reverse gear from all
operation modes
• Forced rear-view camera option (only on vehicles with PDC button)
• Manual return from rear-view and front camera (cancellation of automatic switching)
• Picture-in-picture mode combining after-market rear-view and front camera picture(s)
with factory parking sensor graphics
• Compatible with all factory video accessories (e.g. rear-view camera, DVD-changer, etc.)
• Plug & Play installation
• For the F-series BMW with navigation system or radio and 6.5”, 7”, 8.8” or 10.25”
monitor with 4+2pin HSD2 LVDS connector
• On i3 installations, part# HAR-i3 is required to install the interface. The interface module
is installed/mounted under the rear seat and you will need to run the HAR-i3 towards
the rear seat.
BM-77C Module
BM-77C Harness
4+2 PIN HSD2 LVDS Cable
Power/CAN Harness
1 / 12
rev.122617
2 / 12
rev.122617
Setting the DIP switches of the Interface Box.
DIPs 1 and 2 on the back of the interface-box is used to set the monitor size. DIP 3 must be set to OFF.
Vehicle/ Navigation
Dip 1
Dip 2
Dip 3
6.5“ monitor.
OFF
OFF
No function
7“ monitor
OFF
OFF
No function
8.8“ monitor
ON
OFF
No function
10.25“ monitor (ver.1)
ON
OFF
No function
10.25“ monitor (ver.2)
ON
ON
No function
After each change of the DIP switch settings you have to execute a power reset of the interface box!
Note: The interface is installed on the backside of the head unit and needs a constant +12V power source.
Connecting Interface box and harnesses
Remove the female Quadlock connector of the vehicle harness from the rear of the navigation
computer.
Remove optical leads from the female Quadlock connector of the vehicle harness and insert them into
the female Quadlock connector of BM-77C harness at the same position.
Connect the female Quadlock connector of vehicle harness to the male Quadlock connector of
the BM-77C harness.
1
2
3
BM-77C
HARNESS
3 / 12
rev.122617

Product Specifications

Brand: CRUX
Category: Not categorized
Model: VRFBM-77C

Do you need help?

If you need help with CRUX VRFBM-77C, ask a question below and other users will answer you




Not categorized CRUX User Manuals

CRUX

CRUX SWRFD-60T Manual

19 October 2024
CRUX

CRUX SWRFD-60B Manual

13 October 2024
CRUX

CRUX SOOGM-16K Manual

13 October 2024
CRUX

CRUX SOCGM-17B Manual

13 October 2024
CRUX

CRUX DKGM-49 Manual

13 October 2024
CRUX

CRUX DKGM-C2S Manual

13 October 2024
CRUX

CRUX DKVW-21 Manual

13 October 2024
CRUX

CRUX SOHTL-20 Manual

13 October 2024
CRUX

CRUX AVIGM-04S Manual

13 October 2024
CRUX

CRUX SOCVW-21 Manual

13 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals