IFi Audio ZEN DAC Manual

Read below 📖 the manual in Italian for IFi Audio ZEN DAC (1 pages) in the Not categorized category. This guide has been helpful for 20 people and has been rated 4.5 stars on average by 2 users

Page 1/1
POWE R MATCH
TRUE BASS
7. Balanced 4.4mm analogue output
This is an analogue output via 4.4mm > XLR or balanced other
interconnects. You could use this for an active speaker or an
amplifier.
Tip: As Z is balanced, this is the recommended output.EN DAC
8 Variable/. Fixed switch
will determine whether or not ZEN DAC analogue volume control
is used.
9 RCA. analogue output
This is an analogue output.
10 and power . USB-audio input
This is a USB input. It connects ZEN DAC to the computer audio
source and provides the power supply.
11. DC 5V power
ZEN DAC is powered by 5 volts, either via the enclosed USB
cable (for connection to laptop or PC) or DC power supply (not
included).
Tip: For best performance upgrade the USB power supply to a super-low noise
power adapter such as iFi iPower or iPower X.
ZEN DAC
2 3 5
7 8 9 10 11
Thank you for purchasing the from Z series. The is a DAC EN DAC
balanced .USB-audio DAC amplifier
1. PowerMatch® (high/low)
PowerMatcsetting should be on low for IEMs and on high for
on/over headphones.
Warning: Due to the high power of ZEN DAC, before changing the PowerMatch
your headphones, speakers or your hearing. iFi audio is not responsible for any
hearing or equipment damage from misuse.
2. True ®Bass (high/low)
Many headphones lack the correct bass response. TrueBass® is
an analogue circuit designed to 'add back' the lost bass response
for the most accurate playback.
Tip: Open-back headphones and some IEMs usually sound better with TrueBass
set high. Adjust to suit.
3. Analogue Volume control
The analogue volume control in ZEN DAC is superior to any
digital volume control. It can be used to control the headphone
volume or the pre-amplifier volume (when set to 'Variable'). If the
output at the rear is set to 'Fixed' the volume control is bypassed.
4. Audio Format LED (kHz)
The LED colour scheme indicates the audio format and sampling
frequency received by ZEN DAC from the music source.
LED Mode
Green PCM 44/48/88/96kHz
Yellow PCM 176/192/353/384kHz
Cyan DSD64/DSD128
Blue DSD256
Magenta MQA
5. Single-ended 6.3mm output
Connect single-ended 6.3mm headphones. With single-ended
3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.
6. Balanced 4.4mm analogue output
Connect balanced 4.4mm headphones.
Tip: As ZEN DAC is balanced, we recommend the 4.4mm output.
Ver1.2
ifi-audio.com
1 64
Specification
Input: USB3.0 B Socket (USB2.0 compatible)
Formats: 44.1/48/88.2/96/176.4/192kHz PCM
2.8/3.1/5.6/6.2/11.2/12.4MHz DSD
353/384KHz DXD
DAC: Bit-Perfect DSD & DXD DAC by Burr Brown
Line Section
Output: Audio RCA (UnBAL) 2.1V fixed
1V / 3.3V max. (variable)
4.4mm Pentaconn (BAL) 4.2V fixed
2V / 6.2V max. (variable)
Zout: <= 100 Ohm (UnBAL)
<= 200 Ohm (BAL)
SNR: <-116dB(A) @ 0dBFS (UnBAL/BAL)
DNR: >116dB(A) @ -60dBFS (UnBAL/BAL)
THD+N: <0.0015% @ 0dBFS (UnBAL/BAL)
Headphone Section
Output: 6.3mm (UnBAL) 1V / 3.3V max.
12 Ohm - 300 Ohm Headphone
4.4mm Pentaconn (BAL) 2V / 6.2V max.
12 Ohm - 600 Ohm Headphone
Output Power: UnBAL >280mW @ 32R; >36mW @ 300R
BAL >380mW @ 50R; >70mW @ 600R
Output Impedance: <1 Ω (UnBAL/BAL)
THD & N: <0.005% (125mW @ 32R)
SNR: >113dBA (3.3V UnBAL / 6.2V BAL)
Power consumption: N ~0.5Wo Signal
Max Signal ~2.5W
Dimensions: 117(l) x 100(w) x 30(h)mm
Weight: 491g (1.08 lbs)
Warranty period: 12 months
Specifications are subject to change without notice.
3"
8"

Product Specifications

Brand: IFi Audio
Category: Not categorized
Model: ZEN DAC

Do you need help?

If you need help with IFi Audio ZEN DAC, ask a question below and other users will answer you




Not categorized IFi Audio User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals