Impact EX-100A Manual
Read below π the manual in Italian for Impact EX-100A (20 pages) in the Lamp category. This guide has been helpful for 19 people and has been rated 4.5 stars on average by 2 users
Page 1/20
EX-100A Monolight
INSTRUCTIONS
www.impactstudiolighting.com
impact
Page 20
(back cover)
Page 1
(front cover)
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
For EX-100A accessories
and to see all of our lighting equipment,
please visit our Web site.
impact
TM
TM
Thank you for your purchase of the Impact EX-100A Monolight. The
EX-100A Monolight is economical and lightweight, yet durable enough to
give you many years of trouble-free service and enjoyment. Please read
these operating instructions and safety precautions carefully before
operating this equipment.
Features
β’ Three-stop range β full power to 1/8 power, steplessly
β’ Built-in optical slave
β’ Modeling lamp can be set to proportional or full power
β’ Accepts Elinchrom-style reξectors and head accessories
(8-inch grid reξector included)
β’ Tactile, βgrippyβ feel that resists slipping, scratches, and shock damage
β’ Commonly available 1/8Λ mini-plug sync input
β’ Low 4.3V trigger voltage β safe for any cameraβs circuitry
Power Requirements
This light comes in two models; one is designed for use with 110/120V AC power in the US
and the other for 220V AC power in Europe. Neither model can be used outside of its
native power region. Both are supplied with a three-prong, grounded plug. Do not
attempt to defeat this safety feature. If necessary, use only grounded extension cords
rated for six amps or greater.
Warning
There are no user-serviceable parts inside the unit. Only qualiξed service engineers
should access the inside of the case (Danger β high-voltage parts inside). Avoid damage
to both the ξashtube and modeling lamp. If the modeling lamp or ξashtube become
cracked or damaged in any way, they should be replaced immediately. Do not use your
ξash unit in an environment where moisture or ξammable vapor is likely to come in
contact with the unit. Turn the power off and unplug the power cord when the unit is not
in use. Always remove the modeling lamp and replace the protective cap when
transporting the unit. Avoid strong light falling onto the slave cell as it will prevent
efξcient operation. If the unit blows a fuse, a replacement fuse can be inserted in the
pull-out compartment on the back of the unit. To ensure long life of the ξash capacitors,
the ξash unit should be powered up and ξred several times at least every two months.
All images in this manual are for illustrative purposes only. Your unit may differ slightly from the one pictured.
Page 2 Page 19
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
One-Year Limited Warranty
Mount on a stand
(1) Select a stand or support
system of suitable weight
and dimensions to ensure
stable operation of the unit.
Install Reξector &
Modeling Lamp
(2) Remove the protective
cap by pressing in and
turning it counter-
clockwise. Pull the cap off
and set aside.
(3) Install the modeling
lamp by screwing it into the
threaded socket.
CAUTION: Do not touch the lamp with your bare hands. Oil residue from your ξngers can
cause the surface of the lamp to heat unevenly and explode. Use white cotton gloves or a
clean cloth.
(4) Install the reξector where the protective cap was before. Align the two notches on
the reξector with the white guidelines on the ξash unit, press the reξector in and rotate
clockwise until it locks in place. Rotate the outer ring to secure the reξector.
Note: Take care when ξtting or removing reξectors or softboxes to not damage the
ξashtube assembly. The ξashtube is very delicate. Always switch off the unit and
disconnect the power before ξtting or changing lamps, ξashtubes, reξectors, or softboxes.
Preparing Your Monolight for Use
Page 18 Page 3
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
1
3 4
2
Speciξcations
EX-100A
Power Output 100 W/S
Guide Number
1
30
Output Control Range Full power to 1/8 stepless
Recycling Time 1~2 seconds
Flash Duration 1/1000 ~ 1/1500 second
Flash Ready Indicator LED and audible beep
Modeling Lamp 60W (not to exceed 100W)
Triggers Sync cable, slave sensor, test button
Trigger Voltage 4.3V
Built-in Slave Cell Yes
Color Temperature 5800Β°K Β±200Β°K
Flash Tube Plug-in type, user replaceable
Reξector Mount Elinchrom-type
Sync Cable 1/8Λ phono jack
Power Source 110~120V AC, 60Hz
Circuit Protection 6.3A Fuse
Dimensions 9.5 Γ 7.75 Γ 5Λ (240 Γ 198 Γ 127 mm) β without reξector
11.25 Γ 8.25 Γ 10.3Λ (285 Γ 210 Γ 262 mm) β with reξector
Weight 2.6 lb. (1.2 kg)
1
Guide Number is calculated at f/8, 10ft, ISO 100, using the included reξector, and is a starting point.
You should perform your own evaluations to determine the results you prefer.
Contents of carton
Carefully remove the monolight from the box. You should have the following:
β’ monolight with protective cap and ξashtube installed
β’ 60W modeling lamp β’ 8Λ grid reξector β’ sync cable
β’ spare fuse β’ power cable β’ user manual
You may also have other items, such as a light stand, umbrella, or softbox,
if you purchased the EX-100A as part of a kit.
Product Specifications
| Brand: | Impact |
| Category: | Lamp |
| Model: | EX-100A |
Do you need help?
If you need help with Impact EX-100A, ask a question below and other users will answer you
Lamp Impact User Manuals
17 October 2024
17 October 2024
17 October 2024
17 October 2024
17 October 2024
17 October 2024
17 October 2024
17 October 2024
17 October 2024
17 October 2024
Lamp User Manuals
- Lamp Sony
- Lamp Samsung
- Lamp Xiaomi
- Lamp IKEA
- Lamp Philips
- Lamp AFX
- Lamp Hama
- Lamp Neewer
- Lamp Hazet
- Lamp Topeak
- Lamp Schwaiger
- Lamp Godox
- Lamp Integral LED
- Lamp Golden Lighting
- Lamp ET2
- Lamp Quoizel
- Lamp Crystorama
- Lamp Brennenstuhl
- Lamp Aputure
- Lamp NEO Tools
- Lamp Westinghouse
- Lamp Dainolite
- Lamp EMOS
- Lamp Nanlite
- Lamp Cameo
- Lamp BeamZ
- Lamp Livoo
- Lamp Steinel
- Lamp Flex
- Lamp Maxim
- Lamp Brandson
- Lamp NUVO
- Lamp Sonneman
- Lamp Elgato
- Lamp Ansmann
- Lamp V-Tac
- Lamp Elation
- Lamp Fredrick Ramond
- Lamp Chauvet
- Lamp Karma
- Lamp Ridem
- Lamp Black Diamond
- Lamp Dedra
- Lamp Ozito
- Lamp Hansa
- Lamp Eurolite
- Lamp Casalux
- Lamp Profoto
- Lamp Petzl
- Lamp Gravity
- Lamp Olight
- Lamp Altman
- Lamp Setti+
- Lamp Kanlux
- Lamp Xline
- Lamp ARRI
- Lamp Ledlenser
- Lamp Perfect Christmans
- Lamp XCell
- Lamp Jinbei
- Lamp Apa
- Lamp Bolt
- Lamp Heitronic
- Lamp Theben
- Lamp Raya
- Lamp Lucide
- Lamp Hensel
- Lamp Waldmann
- Lamp Kind LED
- Lamp Zafferano
- Lamp Zadro
- Lamp August
Latest Lamp User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024