Magnus DX-3320M Manual
Read below š the manual in Italian for Magnus DX-3320M (8 pages) in the Tripod category. This guide has been helpful for 22 people and has been rated 4.5 stars on average by 2 users
Page 1/8
ā¢ Never set up or pull down a tripod while a camera is
mounted.
ā¢ Do not move the tripod or adjust the legs while a
camera is mounted.
ā¢ Do not exceed the maximum weight capacity of the
tripod.
ā¢ Never leave a camera unattended on the tripod.
ā¢ The camera should be securely fastened to the quick-
release mounting plate before mounting onto the
tripod.
ā¢ Never mount a camera to the tripod until all tripod
legs are locked and stabilized.
ā¢ Do not stand on, rest on, or hang anything from the
mid-level spreader.
ā¢ Do not attempt to remove the mid-level spreader.
ā¢ Do not lift or move the tripod by the head.
ā¢ Keep hands clear of the inside of the legs to avoid
trapping ļ¬ngers.
ā¢ The safe operation of the tripod is the responsibility
of the user.
ONE (1) YEAR LIMITED WARRANTY
This MAGNUS product is warranted to the original
purchaser to be free from defects in materials and
workmanship under normal consumer use for a period
of one (1) year from the original purchase date or thirty
(30) days after replacement, whichever occurs later.
The warranty providerās responsibility with respect to
this limited warranty shall be limited solely to repair or
replacement, at the providerās discretion, of any product
that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace
it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with speciļ¬c legal rights, and you may
also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Magnus
Customer Service Department to obtain a return
merchandise authorization (āRMAā) number, and return
the defective product to Magnus along with the RMA
number and proof of purchase. Shipment of the defective
product is at the purchaserās own risk and expense.
For more information or to arrange service, visit
www.MagnusTripods.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.Gradusgroup.Com
Magnus is a registered trademark of the gradus group.
Ā© 2016 Gradus Group LLC. All rights reserved.
Ownerās
Manual
User Cautions
Photo Tripod Components
www.MagnusTripods.com
Thank you for choosing Magnus.
Congratulations on the purchase of your new Magnus
tripod. This tripod features a rapid center column
that detaches to serve as an adjustable four-section
monopod, and telescoping legs with ļ¬ip-locks for fast
and easy leg adjustments. The three-way pan & tilt
head gives you total control over camera positioning,
and the quick-release plate features a 1/4ā-20 male
thread for universal camera mounting. There is also
a bubble level to ensure that your shot is properly
aligned.
Please read and follow these instructions, and keep
this manual in a safe place.
Platform Orientation
Locking Knob
Universal Ā¼-20
Mounting Screw
Photo Tripod
DX-M
Tilt/Pan Bar /
Tilt Lock
Center Column
Locking Knob
Foam Padding
Center Brace
Locking Collar
Retractable
Spiked Feet
Quick-Release
Mounting Plate
Pan Locking
Knob
Leg
Flip-Lock
Image is for illustration purposes only.
Features vary by model.
MAGNUS
A Gradus Group Brand
TM
GG4
Center column/
monopod
ā¢ Never set up or pull down a tripod while a camera is
mounted.
ā¢ Do not move the tripod or adjust the legs while a
camera is mounted.
ā¢ Do not exceed the maximum weight capacity of the
tripod.
ā¢ Never leave a camera unattended on the tripod.
ā¢ The camera should be securely fastened to the quick-
release mounting plate before mounting onto the
tripod.
ā¢ Never mount a camera to the tripod until all tripod
legs are locked and stabilized.
ā¢ Do not stand on, rest on, or hang anything from the
mid-level spreader.
ā¢ Do not attempt to remove the mid-level spreader.
ā¢ Do not lift or move the tripod by the head.
ā¢ Keep hands clear of the inside of the legs to avoid
trapping ļ¬ngers.
ā¢ The safe operation of the tripod is the responsibility
of the user.
ONE (1) YEAR LIMITED WARRANTY
This MAGNUS product is warranted to the original
purchaser to be free from defects in materials and
workmanship under normal consumer use for a period
of one (1) year from the original purchase date or thirty
(30) days after replacement, whichever occurs later.
The warranty providerās responsibility with respect to
this limited warranty shall be limited solely to repair or
replacement, at the providerās discretion, of any product
that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace
it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with speciļ¬c legal rights, and you may
also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Magnus
Customer Service Department to obtain a return
merchandise authorization (āRMAā) number, and return
the defective product to Magnus along with the RMA
number and proof of purchase. Shipment of the defective
product is at the purchaserās own risk and expense.
For more information or to arrange service, visit
www.MagnusTripods.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.Gradusgroup.Com
Magnus is a registered trademark of the gradus group.
Ā© 2016 Gradus Group LLC. All rights reserved.
Ownerās
Manual
User Cautions
Photo Tripod Components
www.MagnusTripods.com
Thank you for choosing Magnus.
Congratulations on the purchase of your new Magnus
tripod. This tripod features a rapid center column
that detaches to serve as an adjustable four-section
monopod, and telescoping legs with ļ¬ip-locks for fast
and easy leg adjustments. The three-way pan & tilt
head gives you total control over camera positioning,
and the quick-release plate features a 1/4ā-20 male
thread for universal camera mounting. There is also
a bubble level to ensure that your shot is properly
aligned.
Please read and follow these instructions, and keep
this manual in a safe place.
Platform Orientation
Locking Knob
Universal Ā¼-20
Mounting Screw
Photo Tripod
DX-M
Tilt/Pan Bar /
Tilt Lock
Center Column
Locking Knob
Foam Padding
Center Brace
Locking Collar
Retractable
Spiked Feet
Quick-Release
Mounting Plate
Pan Locking
Knob
Leg
Flip-Lock
Image is for illustration purposes only.
Features vary by model.
MAGNUS
A Gradus Group Brand
TM
GG4
Center column/
monopod
Utilizing the Pan & Tilt Head
1
To utilize the tilt
feature, loosen the pan
& tilt bar by rotating it
counterclockwise. Tilt
the tripod head to the
desired angle, and then
rotate the pan & tilt bar
clockwise to lock the
new position (Fig. G).
2
To utilize the 360Ā°
panning feature, loosen
the panning locking
knob by rotating it
counterclockwise. Pan
as necessary, and then
rotate the panning
locking knob clockwise
to lock the new position
(Fig. H).
3
To change the camera
orientation from a
horizontal to vertical
position, loosen the
platform locking
knob by rotating it
counterclockwise. Rotate the platform 90Ā°, and then
rotate the platform locking knob clockwise to lock
the new position (Fig. I).
Adjusting the Center Column Height
1
To raise or lower
the center column,
loosen the center
column locking
knob by rotating it
counterclockwise
(Fig. J).
2
Pull the center column
up to the desired
height, and then
rotate the center
column locking knob
clockwise to lock the
new position (Fig. K).
Utilizing the Monopod
1
To convert the center column to
a monopod, loosen the center
column locking knob by rotating
it counterclockwise, then pull
the center column up and out
of the tripod. You now have a
monopod.
2
To extend the monopod, grasp
the main body of the monopod
above the top grip with one
hand. With the other hand,
rotate the top grip 1/4 turn in
the direction indicated in photo.
Extend the top section and
rotate the grip 1/4 turn back to
lock it.
3
Grip the extended section
with one hand and loosen
the second grip by rotating it
1/4 turn. Extend the second
section and tighten the grip
by rotating it 1/4 turn back to
lock it.
4
Grip the newly extended
section and loosen the third
grip by rotating it 1/4 turn.
Extend the section and tighten
the grip by rotating it 1/4 turn
back to lock it.
5
Grip the newly extended
section and loosen the rubber
foot of the monopod and
rotate it 1/4 turnāthis will
release the last section to be
extended. Lock it by rotating
the rubber foot 1/4 turn back.
Opening the Tripod
1
Always extend the legs from the top ļ¬ip-locks ļ¬rst.
Pull out on each ļ¬ip-lock and extend the legs to the
desired height. Close each ļ¬ip-lock. (See Figs. A-B.)
2
Rotate the locking
collar counterclockwise
to release the center
brace, and gently pull
the legs out. Push
down on the center
brace, and then rotate
the locking collar
clockwise to lock the
legs in place (Fig. C).
Mounting the Quick-Release Plate to the
Camera
1
To remove the quick-release plate from the tripod
head, use your thumb to turn out and hold the plate
locking lever and remove the quick-release plate
(Fig. D).
2
Line up the quick-release plate lengthwise with the
bottom of the camera. Match the quick-release
plate screw to the cameraās mounting thread, and
mount the plate to the camera by ļ¬ipping out the
D-ring handle to rotate the screw clockwise until
snug (Fig. E).
3
Press down on the D-ring so that it is ļ¬at against
the bottom of the quick-release plate. Mount the
camera/quick-release plate assembly to the tripod
Figure A Figure B
Figure E
Figure F
Figure D
Figure C
Figure G
Figure H
Figure I
head by pulling and
holding back on the
plate locking lever.
Insert the camera/
quick-release plate
assembly and push the
plate locking lever to
lock it in place (Fig. F).
Note: Be sure to collapse the monopod to its shortest length
before replacing it in the tripod.
All images are for illustration purposes only. Features vary by
model.
Note: Always extend the
monopod from the top first
and always grip the monopod
directly above the section you
are extending or retracting.
When retracting the sections of
the monopod, start by rotating
the rubber foot to loosen the
last section, gripping the section
above it. Repeat for each section.
Figure K
Figure J
Product Specifications
| Brand: | Magnus |
| Category: | Tripod |
| Model: | DX-3320M |
Do you need help?
If you need help with Magnus DX-3320M, ask a question below and other users will answer you
Tripod Magnus User Manuals
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
17 October 2024
17 October 2024
Tripod User Manuals
- Tripod Neewer
- Tripod Kogan
- Tripod Vello
- Tripod Manfrotto
- Tripod Kodak
- Tripod E-Image
- Tripod Celly
- Tripod Revo
- Tripod Sachtler
- Tripod IOptron
- Tripod Tiltall
- Tripod Square Jellyfish
- Tripod Proaim
- Tripod Libec
- Tripod Gravity
- Tripod Celestron
- Tripod Glide Gear
- Tripod Vanguard
- Tripod Vinten
- Tripod Stalco
- Tripod SteadiCam
- Tripod ARRI
- Tripod Fidlock
- Tripod Vortex
- Tripod Robus
- Tripod Miller
- Tripod Studio Assets
- Tripod Easyrig
- Tripod Peak Design
- Tripod Hohem
- Tripod Flycam
- Tripod Velbon
- Tripod 3 Legged Thing
- Tripod FLM
- Tripod Fat Gecko
Latest Tripod User Manuals
27 October 2024
26 October 2024
25 October 2024
24 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
17 October 2024
17 October 2024