Whirlpool W8 09AD SILENCE Manual

Whirlpool Washing machine W8 09AD SILENCE

Read below 📖 the manual in Italian for Whirlpool W8 09AD SILENCE (6 pages) in the Washing machine category. This guide has been helpful for 19 people and has been rated 4.5 stars on average by 2 users

Page 1/6
GB
Quick Guide
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
1.1. AUTODOSE buttonAUTODOSE button
2.2. SCROLLSCROLL UP / SCROLL DOWN buttonsUP / SCROLL DOWN buttons
3.3. ON/OFF buttonON/OFF button
4.4. WATER SAVE button and indicator lightWATER SAVE button and indicator light
5.5. START/PAUSE buttonSTART/PAUSE button
6.6. CONFIRM / KEY LOCK buttonCONFIRM / KEY LOCK button
7.7. START DELAY buttonSTART DELAY button
8.8. SPIN buttonSPIN button
9.9. TEMPERATURE buttonTEMPERATURE button
10.10. CYCLE OPTION MENUCYCLE OPTION MENU
/ SETTINGS MENU button / SETTINGS MENU button
11.11. STEAM HYGIENE buttonSTEAM HYGIENE button
12.12. WASH CYCLE SELECTOR KNOBWASH CYCLE SELECTOR KNOB
Maximum load 10 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Pre-
wash
Autodose
feature
Recommended
detergent
Residual dampness %
(***)
Energy consumption
kWh
Total water l
Laundry
temperature °C
Wash cycle
Temperature
Max.
spin speed
(rpm)
Max.
load
(kg)
Duration
(h : m)
Wash
Fabric
softener
Powder Liquid
Setting Range 1 2
Mixed Extra Silence 40°C
- 40°C
600 4,0 **
Mixed
40°C
- 40°C
1400 10,0 **
Synthetics
(3)
40°C
- 60°C
1200 5,5 2:45
35 0,830 56 45
Cotton
(2)
40°C
- 90°C
1400 10,0 3:40
49 1,423 100 45
Delicates
30°C
- 30°C
0 1,0 **
20°C
20°C
- 20°C
1400 10,0 1:40
54 0,210 90 22
Wool
30°C
- 30°C
600 2,0 **
Spin & Drain
*
1400 10,0 **
Rinse & Spin
1400 10,0 **
Anti Allergy
60°C
40°C -
60°C
1400 5,5 **
More Cycles
Shirts 40°C
- 40°C
600 2,0 **
Jeans 40°C
- 40°C
800 4,0 **
Bed & Bath 60°C
- 60°C
1400 10,0 **
Duvet 30°C
- 30°C
1000 3,5 **
Silk & Curtains 30°C
- 30°C
1,0 **
Baby 40°C
- 40°C
800 4,0 **
Cuddly Toys 30°C
- 30°C
1,0 **
Pets Stu 40°C
- 40°C
600 2,0 **
Multi Color 20°C
- 20°C
1400 10,0 **
Anti Stain 40°C
- 40°C
1400 10,0 **
Eco 40-60
(1)
40°C 40°C
1351 10,0 3:59
53 0,800 60 29
1351 5,0 2:55
53 0,530 45 28
1351 2,5 2:30
53 0,310 35 22
Full Load 45’
40°C
- 40°C
1200 10,0 **
Rapid 30’
30°C
- 30°C
800 5,5 0:30
67 0,167 42 28
Steam Refresh 20‘
2,0 **
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your appliance on
www.whirlpool.eu/register
For all testing institutes:
2) Long cotton cycle: set wash cycle “Cotton with a temperature of 40°C.
3) Long synthetics cycle: set wash cycle “Synthetics with a temperature of 40°C.
* By selecting the “Spin & Drain cycle and excluding the spin cycle, the washing
machine will drain only.
** The duration of the wash cycles can be checked on the display.
***
After programme end and spinning with maximum selectable spin speed, in default
programme setting.
6th Sense - the sensor technology adapts water, energy and programme duration to your wash
load.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as the
temperature and pressure of the incoming water, ambient temperature, amount of detergent,
load quantity and type, load balancing and any additional options selected.The values given
for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient
programme in terms of energy and water consumption for washing normally soiled cotton laundry.
On this cycle the Autodose system is disabled and is recommended to use powder detergent in the
manual dosing department.
Note: spin speed values shown on the display can slightly differs from the values stated in the table.
! Selecting ! Selecting “More cycles “More cycles on the control dial gives you access to extra wash cycles shownon the control dial gives you access to extra wash cycles shown
in the table above.in the table above.
4
1
2
3
56
7
8
911
10
12
DISPLAY
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash care
label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment. Optimal
washing results are obtained by respecting the maximum load kg
shown in the cycle table.
Mixed Extra Silence
Discover the silence: this programme runs silently for the entire cycle, spin
phase included, staying always below 60db. The characteristics and the
duration of the cycle make it perfect for being run at night. It is designed
for a half load and mixed bers (cotton & synthetics), with the spin speed
adjusted for a more delicate clean. After the cycle, FreshCare+ option will
start automatically, for 100% freshness and total peace of mind.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic bres and mixed bres.
Synthetics
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Cotton
Normally to heavily soiled and robust cottons .
Delicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them. For best results, use liquid detergent on
delicate garments.
20°C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Wool
All wool garments can be washed using programme‚ “Wool“ even those
carrying the “hand-wash only “ label. For best results, use special
detergents and do not exceed max kg declaration of laundry.
Spin & Drain
Spins the load then empties the water. For resilient garments. If you
exclude the spin cycle, the machine will drain only.
Rinse & Spin
Rinses and then spins. For resilient garments.
Anti Allergy
Suitable for removing major allergens such as pollen, mites and cat or dog
hair, thanks to a high-temperature technology and extra rinses.
! This cycle is working at 60°C temperature for at least 30 minutes.
More Cycles
Shirts
Use the special wash cycle to wash shirts in dierent fabrics and
colours to guarantee they receive the best possible care.
Jeans
Turn garments inside-out before washing and use a liquid detergent.
Bed & Bath
For washing bed linen and towels in a single cycle. It optimises the use
of fabric softener and allows for saving time and electricity. We
recommend the use of powder detergent.
Duvet
Designed for washing eiderdown padded items such as double or
single duvets, cushions and anoraks. It is recommended to load such
padded items in the drum with the edges folded inwards and not to
exceed ¾ of the drums volume. For optimal washing, we recommend
using a liquid detergent.
Silk & Curtains
Use the special wash cycle to wash all silk garments or curtains. We
recommend the use of special detergent which has been designed to
wash delicate clothes.
For washing curtains, fold and place them in a pillow case or mesh bag.
Baby
Use the special wash cycle the remove the soiling typically caused by
babies, while removing all traces of detergent from nappies in order to
prevent the delicate skin of babies from suering allergic reactions.
The cycle has been designed to reduce the amount of bacteria by
using a greater quantity of water and optimising the eect of special
disinfecting additives added to the detergent.
Cuddly toys
Specic programme for removing dust and washing cuddly toys.
Pets Stu
Perfect for removing animal hair from pets bedding and items.
Multi Color
This cycle is suitable for washing multi-coloured items, or various
dierent colours together. The programme is studied to guarantee
colour care, working at 20°C with the same performance as 40°C. It is
suggested to use a detergent for coloured clothes and for low
temperatures.
! It’s always suggested to separate clothes that are faded and new
coloured clothes, being washed for the rst time.
Anti Stain
The programme is suitable to heavily-soiled garments with resistant
colours. It ensures a washing class that is higher than the standard class.
When running the programme, do not mix garments of dierent
colours. We recommend the use of powder detergent. Pre-treatment
with special additives is recommended if there are obstinate stains.
Eco 40-60
Για το πλύσιμο κανονικά λερωμένων βαμβακερών υφασμάτων που
επισημαίνεται ότι μπορούν να πλένονται στους 40°C ή στους 60°C, μαζί
στον ίδιο κύκλο. Αυτό είναι το κανονικό πρόγραμμα για βαμβακερά και το
πιο αποτελεσματικό ως προς την κατανάλωση νερού και ενέργειας. Είναι
ένα κανονιστικό πρόγραμμα που μπορεί να ρυθμιστεί μόνο 40 °C.
Full Load 45’
Suitable for washing a full load of cotton clothes moderately soiled in 45
minutes.
Rapid 30’
For washing lightly soiled garments quickly. This cycle lasts only 30
minutes, saving time and energy.
Steam Refresh 20‘
The garments will be damp once the cycle is completed, so we
recommend hanging them to dry (2 kg, roughly 3 items). This programme
refreshes garments by removing bad odours and relaxing the bres. Insert
dry items only (that are not dirty) and select programme “Steam Refresh
20‘ . The “Steam Refresh 20‘ programme makes ironing easier.
! Do not add softeners or detergents.
! Not recommended for wool or silk garments.
DISPLAY
The display is useful when programming the washing machine and
provides plenty of information.
COTTON
--:--
1:40
140040°
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Pump Filter / Emergency drain hose
(behind cover ap)
7. Adjustable feet (4)
DETERGENT DISPENSER DRAWER
Handle the dispenser with care. Avoid pulling or pushing hard the
dispenser during opening and closing.
AUTOMATIC DOSING:
IMPORTANT: Only use liquid detergent to ll
the detergent tanks (“1” and “2”); never use
powder detergent
1. Tank 1
Liquid generic detergent OR
Liquid specic detergent (e.g. for colours,
wool, sports garments etc.)
IMPORTANT: Never ll Fabric Softener in Tank
Maximum lling quantity: 800 ml
2. Tank 2
Fabric softener
IMPORTANT: Fabric softner could be used only with automatic dosing.
Maximum lling quantity: 400 ml
Choose your preferred conguration among those mentioned in section
AUTO DOSING
MANUAL DOSING:
3. Detergent compartment for manual dosing
Powder or liquid detergent
Additives
If you use powder detergent, make sure to ll the compartment only up
to the “max” mark.
4. Release button
Press down to remove the detergent dispenser
for cleaning.
When the warning “It’s recommended to clean the
detergent drawer. Follow the use and care guide” is shown
on the display, we recommend cleaning the detergent
drawer, following detailed instructions can be found in
the ‘Care and Maintenance’ section.
If the message appears while the detergent and fabric
softener dispensers are still full, ensure all detergent is
used before cleaning the detergent dispenser.
1
2
3
4
2
Softener
1
PRODUCT DESCRIPTION
1
2
1.
3.
2.
5.
4.
6.
7.
A
E
C
D
B
G
F
By pressing the and buttons, it is possible to select the desired
option and conrm it with the button.
The rst time the machine is switched on, you will be asked to select the
language and the display will automatically display the language selection
menu.
To select the desired language, press the and buttons; to conrm
the selection, press the button.
Area A will display the following: the icon and selected washing
programme, the washing phases and the time remaining to the end of the
wash cycle.
Area B will display the AutoDose status: the selected options, the energy
and water consumption for the chosen cycle and the button lock symbol.
Area C will display the default temperature value on the basis of the set
programme; if the programme does not include the setting of the
temperature, the area will display the -- ° symbol.
Area D will display the default spin cycle speed on the basis of the set
programme; if the programme does not include the setting of the spin
cycle, the area will display the -- symbol.
Area E will display the time remaining to the start of the selected
programme if the DELAYED START function was set.
Pressing button F allows for accessing the menu from which to set Auto
Dosing option.
Pressing button G allows for accessing the menu from which to set
additional washing options.
Pressing and holding button G for 3 seconds allows for accessing the
settings menu:
- CYCLE COUNTER: the user can view the total numbers of cycles per-
formed by the appliance. Pressing the button the user can exit the
setting.
NOTE: The washer may have already performed a set of cycles. This is due
to extended quality process carried out during production, to guarantee
higher product quality.
- Language: by pressing the and buttons, the user can select the
desired language and conrm it with the button.
- Sound: by pressing the and buttons, the user can activate or
deactivate the sound of the buttons and conrm it with the button.
- Display brightness: by pressing the and buttons, the user can
select the type of display brightness and conrm it with the button.
- Autodose: By pressing the buttons and the user can choose from
three dierent levels of detergent usage. For more details see section
AUTODOSE SET-UP”. Only for AUTODOSE it is possible to carry out the
setup using the dedicated option button.
- Restoring the factory settings: pressing and holding the button for 2
seconds restores the factory settings.
DISPLAY INDICATORS
Failure: Call Service
Refer to Troubleshooting section
Failure: Drain pump lter clogged
Water cannot be drained; drain pump lter might be blocked
Failure: No water
No or not sucient inlet water.
In the event of any failure, refer to the Troubleshooting section.
Key Lock
To activate the control panel lock, press and hold the button for
roughly 3 seconds. When the display visualises “KEY LOCK”, the control
panel is locked (except for the ON/OFF button ). This will prevent
accidental modications to wash cycles, especially when children are at
home. To deactivate the control panel lock, press and hold the
button for approximately 3 seconds.
Locked door indicator
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened.
FIRSTTIME USE
Once the appliance has been installed, and before you use it for the rst
time, run a wash cycle with a small amount of detergent and no laundry,
using the wash cycle Cotton (60°) without option Prewash selected.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; “WHIRLPOOL will appear on the display.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Push to open the detergent dispenser drawer and pour the detergent
into the relevant compartments, as described in the DETERGENT
DISPENSER DRAWER section.
- Close the door.
- Select the desired wash cycle.
- Select the desired options.
- The machine automatically selects the default temperature and spin
speed set for the selected wash cycle.
- Press the START/PAUSE button to start the wash cycle; the door will
lock ( symbol on). Once the cycle starts, the Sensing routine will begin:
the drum will move and then door will be unlocked and locked again to
start properly the washing cycle.
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again. To start
the wash cycle from the point at which it was interrupted, press the
START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle.
If the symbol is not lit, the door may be opened. Press the START/PAUSE
button again to continue the cycle. Once the cycle starts, the Sensing
routine will begin: the drum will move and then door will be unlocked
and locked again to start properly the washing cycle.
STOP&ADD
An icon on the display will signal when additional garments can be
introduced into the washing machine, without decreasing the washing
performance. To add garments, rst stop the washing machine by
pressing the START/PAUSE button then open the door and insert
them.
Press the START/PAUSE button again to restart the wash cycle from
the point at which it was interrupted.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button, then select the desired cycle and press
the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold for a few
seconds the ON/OFF button. If water is present then drain function will
start. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This will be indicated by the word “CYCLE END” on the display; when the
symbol switches o, the door may be opened. Open the door, unload the
laundry and switch o the machine. If you do not press ON/OFF button,
the washing machine will switch o automatically after about 10 minutes.
OPTIONS
- If the selected option is incompatible with the set wash cycle or with
another previously selected option, in the menu the name of
incompatible option is represented in grey color and the wording Not
available will appear on the display, accompanied by a buzzer, the
option will not be activated.
AutoDose
The automatic dosing system will intake the amount of liquid detergent
accordingly to the selected level and selected program, and it will ajust it
also to the load detected, while for the softner the system is automatically
adjusting in according to selected program and automatic load detected.
The automatic dosing system has been activated at the factory for all the
designated programmes and can be deactivated for each one individually.
In order to use intelligent dosing, ll the dispenser.
Note:
- Fill the dispenser only with suitable detergent and care products
- If you change the liquid detergent or fabric softener, empty and clean
the dispenser beforehand.
- Pour liquid detergent (Detergent) and fabric softener (Softener) into the
relevant dispensers every time the related icon is showing empty level.
Autodose Set-up
- Switch the washing machine ON.
- By default the Autodose feature is activated; for some cycles the
autodose cannot be enabled according to the wash cycle table.
- The display will show a message if the drawer is empty.
- In this case, pull out the detergent dispenser drawer and ll it with
detergent/softener into the relative AUTODOSE compartment. Close the
drawer.
- Switch the washing machine OFF
- Switch the washing machine ON again. Now the symbols shown on the
upper left side of the display ( ) indicate the machine is loaded with
detergent and/or softener.
- Press and hold the AUTODOSE button( ) for 3 seconds.
The following modes are available:
- Detergent tank (Enable\Disable)
- Detergent status (Full\Empty)
- Detergent concentration
- Softener tank (Enable\Disable)
- Softener status (Full\Empty)
- Reset auto dose value
- Select the DETERGENT TANK and/or the SOFTENER TANK option accord-
ing to your needs and press OK.
- Select ENABLED/DISABLED and press OK
- Select the DETERGENT CONCENTRATION option and choose it according
to your preferred detergent specications and press OK (Only for DETER-
GENT TANK option).
By default, the system will use a dose of 25ml of detergent for each cycle.
Select 25ml for highly concentrated detergent as recommended dosing
value on deterget package for medium loads of 4Kg-5Kg is <30ml.
Select 35ml for medium concentrated detergent as recommended dosing
value on deterget package for medium loads of 4Kg-5Kg is 30-40ml.
Select 45ml for low concentrated detergent as recommended dosing value
on deterget package for medium loads of 4Kg-5Kg is >40ml.
Ensure you adjust the preset dosing value to the correct level, corresponding
to the recomended values indicated on the detergent package that you
intend to use, considering a medium load (4Kg-5Kg).
This option is not valid for adjustment of softner concentration.
- Select a washing programme with the selector dial.

Product Specifications

Brand: Whirlpool
Category: Washing machine
Model: W8 09AD SILENCE

Do you need help?

If you need help with Whirlpool W8 09AD SILENCE, ask a question below and other users will answer you




Washing machine Whirlpool User Manuals

Washing machine User Manuals

Latest Washing machine User Manuals

Teka

Teka TFL10D70 Manual

27 October 2024
AEG

AEG LWR8WEP1609 Manual

27 October 2024
Electrolux

Electrolux EWF1090 Manual

27 October 2024
Electrolux

Electrolux EW1080F Manual

27 October 2024
Electrolux

Electrolux EWF1470 Manual

27 October 2024
Electrolux

Electrolux EW1265F Manual

27 October 2024
AEG

AEG L98690FL Manual

27 October 2024
AEG

AEG L77480FL Manual

27 October 2024
Electrolux

Electrolux EWF12821 Manual

27 October 2024