Apc EPDU-TH3 Manual

Apc Humidifier EPDU-TH3

Read below 📖 the manual in Italian for Apc EPDU-TH3 (2 pages) in the Humidifier category. This guide has been helpful for 48 people and has been rated 4.5 stars on average by 2 users

Page 1/2
Installation TME35315 Release date: 9/2023
Easy PDU Temperature/Humidity Sensor EPDU-TH3
Installation
pdu1683a
1. Peel the backing off one side of the double-sided mounting tape.
2. Apply the mounting tape to the back of the sensors.
3. Peel the backing off the other side of the mounting tape and press the sensors
to the chosen location.
pdu1682a
4. Route the cable to your monitoring appliance.
5. Use cable ties (not provided) to secure the cable.
6. Connect the RJ45 connector at the end of the sensor cable to the appropriate
port of the monitoring appliance.
APC
70 Mechanic Street
02035 Foxboro, MA
USA
www.apc.com
As standards, specifications, and design
change from time to time, please ask for
confirmation of the information given in this
publication.
© 2023 – 2023 Schneider Electric. All rights
reserved.
Specifications
Electrical
Supply Voltage 3.3 - 5.5 VDC
Output Digital (1 WIRE)
Physical
Cable Length Maximum: 2.7 m (8.86 ft)
Minimum: 2.3 m (7.55 ft)
Dimensions (L x W x H) 53 x 26 x 13 mm (2.09 x 1.02 x 0.51 in)
Shipping dimensions (L x W x
H)
210 x 144 x 40 mm (8.27 x 5.67 x 1.57 in)
Weight
0.11 kg (0.24 lb)
Shipping weight 0.25 kg (0.55 lb)
Environmental
Temperature: Operating range -40 to +80 °C
Typical accuracy
±0.5 °C
Temperature response time 5 seconds
Resolution
0.1 °C
Relative Humidity: Operating
Range
0~99.9% RH
Typical accuracy
±3% RH
Humidity response time 5 seconds
Resolution
0.1% RH
Compliance
Safety verification CE
Environmental
RoHS and Reach
2 TME35315

Product Specifications

Brand: Apc
Category: Humidifier
Model: EPDU-TH3

Do you need help?

If you need help with Apc EPDU-TH3, ask a question below and other users will answer you