Blizzard Hype 150 Manual

Read below 📖 the manual in Italian for Blizzard Hype 150 (16 pages) in the Not categorized category. This guide has been helpful for 26 people and has been rated 4.5 stars on average by 2 users

Page 1/16
Blizzard Lighting, LLC
http://www.blizzardpro.com
Waukesha, WI USA
Copyright (c) 2022
Page 2
Hype™ 150 User Manual Rev. A © 2022 Blizzard Lighting, LLC
TABLE OF CONTENTS
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions 4
2. Meet the HYPEâ„¢ 150 5
Main Features 5
DMX Quick Reference 5
HYPEâ„¢ 150 Pin-Up Picture 6
Rear Connections 6
3. Setup 7
Fuse Replacement 7
Connecting A Bunch of HYPEâ„¢ 150 Fixtures 7
Data/DMX Cabling 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh?!? 8
Take It To The Next Level: Setting Up DMX Control 8
Mounting & Rigging 9
Securing the Fixture 9
4. Operating Adjustments 10
The Control Panel 10
Control Panel Menu Structure 11
Starting DMX Address 11
DMX Channel Mode 11
Auto & Sound Active Modes 11
Dimming Curves 11
DMX Values In-Depth 12
Gobo and Color Wheels 13
5. Appendix 14
Keeping Your HYPEâ„¢ 150 As Good As New 14
Returns (Gasp!) 14
Shipping Issues 14
Tech Specs! 15
Dimensional Drawings 15
Page 3
Hype™ 150 User Manual Rev. A © 2022 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• HYPE™ 150 Moving Head
• Power Cord
• 2x Mounting Brackets
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on purchasing the HYPE™ 150. Now that you’ve got your xture, you
should carefully unpack the box and check the contents to ensure that all parts are present
and in good condition. If anything looks as if it has been damaged in transit, notify the
shipper immediately and keep the packing material for inspection. Again, please save the
carton and all packing materials. If a xture must be returned to the factory, it is important
that the xture be returned in the original factory box and packing.
Powering Up!
All xtures must be powered directly o a switched circuit and cannot be run o a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch - Not all xtures have a voltage select switch, so please verify that the
xture you receive is suitable for your local power supply. See the label on the xture or
refer to the xture’s specications chart for more information. A xture’s listed current
rating is its average current draw under normal conditions. Check the xture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your xture may result if the line voltage applied does
not match the voltage indicated on the voltage selector switch. All xtures must
be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, please just visit our website at www.blizzardpro.com/
support and open a support ticket. We’ll be happy to help, honest.
Disclaimer: The information contained in this document are subject to change without notice. Blizzard
Lightingâ„¢ assumes no responsibility or liability for any errors or omissions that may appear in this user
manual. We reserve the right to update the existing, or create a new document to correct any errors or
omissions. You can download the latest version of this document from www.blizzardpro.com.
Author: Date: Last Edited: Date:
J. Thomas 3/20/2022 J. Thomas 8/9/2022

Product Specifications

Brand: Blizzard
Category: Not categorized
Model: Hype 150

Do you need help?

If you need help with Blizzard Hype 150, ask a question below and other users will answer you




Not categorized Blizzard User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals