Costway SP37380 Manual

Read below 📖 the manual in Italian for Costway SP37380 (10 pages) in the Bicycle trainer category. This guide has been helpful for 23 people and has been rated 4.5 stars on average by 2 users

Page 1/10
USER'S MANUAL
Spinning Bike
SP37380
TIPS:
Your suggestions and comments for Costway are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2018
Great products so far
With your inspiring rating, Costway will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
UNITED STATES
CANADA
UNITED KINGDOM
GERMANY
FRANCE
ITALY
SPAIN
JAPAN
RUSSIA
AUSTRALIA
US office:Fontana
UK office:Ipswich
www.costway.com
Dear Customer,
Please read this instruction very carefully before using this item. You will
find important information regarding safety of your spinning bike.
Note the following precaution before assembling or operating the machine.
1. Keep children and pets away from the Spinning Bike at all times.
DO NOT leave unattended children in the same room with the machine.
2. Handicapped or disabled persons should not use the spinning Bike
without the presence of a qualified health professional or physician.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, ST
OP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY
.
4. Before beginning training, remove all within a radius of 2 meters from the
machine. DO NOT place any sharp objects around the Spinning Bike.
5. Position the Spinning Bike on a clear, level surface away from water and
moisture. Place mat under the unit to help keep the machine stable and to
protect the floor.
6. Use the Spinning Bike only for its intended use as described in this manual.
DO NOT
use any other accessories not recommended by the manufacturer
.
7. Assemble the machine exactly as the descriptions in the instruction
manual.
8. Check all bolts and other connections before using the machine for the
first time and ensure that the trainer is in the safe condition.
9. Hold a routine inspection of the equipment. Pay special attention to
components which are the most susceptible to wear off, i.e. connecting
points and wheels. The defective components should be replaced
immediately
.
The safety level of this equipment can only be maintained
by doing so. Please don't use the Spinning Bike until it is repaired well.
10. NEVER operate the Spinning Bike if it is not functioning properly.
11.
This machine can be used for only one person’
s training at a time.
12. Do not use abrasive cleaning articles to clean the machine.
Remove drops of sweat from the machine immediately after finishing training.
13. Always wear appropriate workout clothing when exercising. Running or
aerobic shoes are also required.
14. Before exercising, always do stretching first.
15. The power of the machine increases with increasing the speed, and the
reverse. The machine is equipped with adjustable knob, which can adjust the
resistance.
WARNING: BEFORE BEGINNING THIS OR ANY EXERCISE PROGRAM,
CONSULT YOUR PHYSICIAN FIRST. THIS IS ESPECIALLY IMPORTANT FOR
INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING
HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING THE
SPINNING BIKE. OUR COMPANY ASSUMES NO RESPONSIBILITY FOR
PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR
THROUGH THE USE OF THIS PRODUCT
www.costway.com
EXPLODED-VIEW & PARTS LIST
FIG.4:
The Pedals (pt. & pt. ) are marked 81 27
"L" and "R" - Left and Right. Connect
them to their appropriate cranks. Note
that the Right pedal should be threaded
on clockwise and the Left pedal
anticlockwise.
FIG. A: Adjusting the Tension:
Increasing or decreasing the tension allows
you to add variety to your workout sessions by
adjusting the resistance level of the bike.
To increase resistance (requiring more
strength to pedal), turn the brake Knob to the
right.
To decrease resistance (requiring less strength
to pedal), turn the brake Knob to the left.
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the
item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at
the above of this instruction sheet you will find an explosion drawing with all
single parts (marked with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
FIG.1:
Attach the Front Stabilizer (pt. ) to the Main21
Frame using two sets of Ø8 Flat Washer
(pt. ), M8 Domed Nut (pt. )95 93
Attach the Rear Stabilizer (pt.3) to the Main
Frame using two sets of Ø8 Flat Washer
(pt. ), M8 Domed Nut (pt. ).95 93
FIG.2:
Put the Seat support tube (pt. 79) into the seat
post tube on the Main Frame. Slacken the Knob
(pt. ) and pull the knob out to select the 90
desired height. Release and retighten the knob.
Use the Knob (pt. ) to adjust the seat front 80
and rear.
The Seat (pt. ) fixed on the Seat support tube 77
(pt. 79), as shown, and lock the nuts under the
seat.
www.costway.com www.costway.com
ASSEMBLY INSTRUCTION
FIG.1
FIG.2
FIG.3:
Put the Handlebar Post (pt. ) into the 53
FIG.3
handlebar post tube on the main
frame. Slacken and pull out the Knob
to select the desired height.
Release and retighten the knob to fix.
Fix the handle cover (pt. ) onto the 49
Handlebar with four sets of Spring
Washer (pt. ) and Bolt (pt. ). Slip 38 39
the monitor (pt. 7) onto the groove on 4
the handle cover and connect the
corresponding cables (Double wire for
Pulse in the right and single wire for sensor in the left).
ATTENTION: YOU SHOULD FIX THE HANDLEBAR TIGHTLY
FIG.4
FIG.A

Product Specifications

Brand: Costway
Category: Bicycle trainer
Model: SP37380

Do you need help?

If you need help with Costway SP37380, ask a question below and other users will answer you