Havis C-DMM-122 Manual

Read below 📖 the manual in Italian for Havis C-DMM-122 (7 pages) in the Not categorized category. This guide has been helpful for 32 people and has been rated 4.5 stars on average by 2 users

Page 1/7
C-DMM-122_INST_REV-9-13
INSTALLATION INSTRUCTIONS
C-DMM-122
2013-2017 Ford Interceptor Sedan
SWING-OUT DASH MONITOR MOUNT
** Does NOT work in Interceptor Sedan with Interior Upgrade Package (Code 12P) **
Always!
Read all instructions before installing any Havis, Inc. products.
Check for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
The Dash Monitor Mount bracket system requires two or three main parts that are sold
separately. See web site Monitor Configurator for more detailed bracket information.
http://www.havis.com/monitor_mounts.htm
1 - Vehicle Specific dash mount bracket. (C-DMM-122)
1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)
1 - Offset adaptor bracket. (C-MM-301)
The C-MM-301 offset adaptor goes between the C-DMM-122 and C-MM-2XX.
It may not be required in some applications.
Docking stations for tablet applications can be bolted directly to C-DMM without adaptor. Offset
adaptor C-MM-303 is available if additional positioning options are desired for docking station.
TOOLS REQUIRED:
• Ratchet Wrench Jig Saw or Plastic cutting tool
• Socket Set Dash panel removal tools
• Open End Wrench - 7/16” Open End Wrench 10mm
• Phillips Screwdriver
HARDWARE and PARTS:
QTY: DESCRIPTION: PART #:
1 Upper Support Bracket CM005091
1 Lower Support Bracket CM005131
2 1/4" x 1/2” Carriage Bolt GSM31999
2 1/4"x 1/2" Pan Head Phillips Bolt GSM33124
2 1/4" Serrated Flange Hex Nut GSM30023
4 1/4” Flat Washer GSM31005
4 1/4” Lock Washer GSM31026
2 6mm x 30mm Hex Bolt GSM33713
1 Monitor Adapter Hardware Included with C-MM-2XX kit
Note: The swing door utilizes a gas spring to assist in opening the door and to eliminate the possibility of
it slamming shut. If additional damping is desired because of heavier equipment, an optional stronger gas
spring is available under Part Number CM86662-30 (sold separately)
Installer must change out gas spring as needed
C-DMM-122_INST_REV-9-13
CM005091
Upper Support Bracket
Main frame Assembly
for Interceptor Sedan
CM005131
Lower Support Bracket
C-MM-301
Offset Adaptor
C-MM-201
Monitor Mount Adaptor
(VESA bracket shown)
C-DMM-122_INST_REV-9-13
View of dash instrument panel
Carefully cut slot with air saw, knife or other tool
as desired
Drill both ends of the slot with 1/4" drill bit
Carefully remove (unsnap) lower/ center dash
panel
Layout a 1/4" high x 5 ½” long slot in the center of
the trim panel at crease below the 12 volt sockets.
(as shown by the white line)
Disconnect plugs and remove lower dash panel

Product Specifications

Brand: Havis
Category: Not categorized
Model: C-DMM-122

Do you need help?

If you need help with Havis C-DMM-122, ask a question below and other users will answer you




Not categorized Havis User Manuals

Havis

Havis C-SW-3 Manual

15 October 2024
Havis

Havis PT-A-912 Manual

15 October 2024
Havis

Havis DS-GTC-212-3 Manual

15 October 2024
Havis

Havis CST00200 Manual

15 October 2024
Havis

Havis C-DMM-122 Manual

15 October 2024
Havis

Havis C-DMM-130 Manual

15 October 2024
Havis

Havis C-SW-2 Manual

15 October 2024
Havis

Havis DS-GTC-211-3 Manual

15 October 2024
Havis

Havis SC-1000-PB Manual

15 October 2024
Havis

Havis DS-PAN-903 Manual

15 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals