Havis C-DMM-129 Manual

Read below đź“– the manual in Italian for Havis C-DMM-129 (6 pages) in the Not categorized category. This guide has been helpful for 22 people and has been rated 4.5 stars on average by 2 users

Page 1/6
C-DMM-129_INST_2-15
INSTALL INSTRUCTIONS
C-DMM-129
2015-2017 DODGE CHARGER SWING-OUT DASH MONITOR MOUNT
NOTE: WILL NOT WORK ON 12.1 INTEGRATED TOCUH SCREEN MODELS
T p1-he Dash Monitor Mount bracket system requires two or three main parts that are Sold
Separately. See web site Monitor Configurator for more detailed bracket information.
http://www.havis.com/monitor_mounts.htm
ď‚· 1 - Vehicle Specific dash mount bracket. (C-DMM-129)
ď‚· 1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)
ď‚· 1 - Offset adaptor bracket. (C-MM-301)
The C-MM-301 offset adaptor goes between the C-DMM-129 and C-MM-2XX. It may not be required
in some applications.
he Dash Monitor Mount bracket system requires two or three main parts that are
Sold Separately. See web site Monitor Configurator for more detailed bracket
information. http://www.havis.com/monitor_mounts.htm
ď‚· 1 - Vehicle Specific dash mount bracket. (C-DMM-130)
ď‚· 1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)
ď‚· 1 - Offset adaptor bracket. (C-MM-301)
The C-MM-301 offset adaptor goes between the C-DMM-130 and C-MM-2XX. It may not be
required in some applications.
TOOLS REQUIRED:
• Ratchet Wrench • Air saw / Utility knife / other? (to cut plastic dash part)
• Socket Set
• Open End Wrench - 7/16”
• Phillips Screwdriver
MOUNT BRACKET PARTS and HARDWARE:
QTY: DESCRIPTION: PART #:
1 Forward Lower Support Bracket CM007051
1 Rear Lower Support Bracket CM007038
1 Upper Support Bracket CM004416
6 1/4 Hex Flange Serrated Nut GSM30023
2 10/32 x 1/2" Phillips Pan head machine screw GSM34097
2 8/32 x 1/2" Phillips Pan head machine screw GSM33110
2 1/4 x 1/2" Carriage Bolt GSM31999
2 # 10” Flat Washer SS GSM31046
2 # 10” Lock Washer SS GSM31065
2 10/32 x 1" Phillips Flat head machine screw GSM33073
2 10/32 Nylock nut GSM30015-1
2 # 10 Flat Washer GSM31003
1 # 10 x 1” Phillips Flat head sheet metal screw GSM33152
1 Small “L” bracket CM93094
1 Monitor Adapter Hardware Varies (monitor specific)
ALWAYS!
• Read all instructions before installing any Havis, Inc products.
• Use hardware provided with install kit
Note: The swing door utilizes a gas spring to assist in opening the door and to eliminate the
possibility of it slamming shut. If additional damping is desired because of heavier equipment, an
optional stronger gas spring is available under Part Number CM86662-30 (sold separately) Installer
must change out gas spring as needed.
C-DMM-129_INST_2-15
C-DMM-129
Assembly for
2015 Charger
C-MM-201
Monitor Mount Adaptor
(VESA bracket shown)
C-MM-301
Offset Adaptor
C-DMM-129_INST_2-15
2015 Dodge Charger Dash
Prior to installation.
Gently pry along the dash with a flat blade panel
removal tool. Slowly working along the frame.
Dash panel partially removed
Dash panel removed
Touch screen removed. The touchscreen has a
theft deterrent system built in so we suggest
leaving the main power plugged in. Phillips
screwdriver.
Temporarily remove two (2) OEM screws.
Ratchet with a 10mm socket.

Product Specifications

Brand: Havis
Category: Not categorized
Model: C-DMM-129

Do you need help?

If you need help with Havis C-DMM-129, ask a question below and other users will answer you




Not categorized Havis User Manuals

Havis

Havis C-SW-3 Manual

15 October 2024
Havis

Havis PT-A-912 Manual

15 October 2024
Havis

Havis DS-GTC-212-3 Manual

15 October 2024
Havis

Havis CST00200 Manual

15 October 2024
Havis

Havis C-DMM-122 Manual

15 October 2024
Havis

Havis C-DMM-130 Manual

15 October 2024
Havis

Havis C-SW-2 Manual

15 October 2024
Havis

Havis DS-GTC-211-3 Manual

15 October 2024
Havis

Havis SC-1000-PB Manual

15 October 2024
Havis

Havis DS-PAN-903 Manual

15 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals