Havis C-DMM-3002 Manual

Havis Not categorized C-DMM-3002

Read below 📖 the manual in Italian for Havis C-DMM-3002 (4 pages) in the Not categorized category. This guide has been helpful for 23 people and has been rated 4.5 stars on average by 2 users

Page 1/4
C-DMM-3002_INST_12-19
INSTALLATION INSTRUCTIONS
C-DMM-3002 Flip up Dash Monitor Mount
2013-2019 Ford Police Interceptor Standard Interior and
Interceptor with Interior Upgrade Package (Ford option code 65U)
TOOLS REQUIRED:
Ratchet Wrench Dash panel removal tool Open End Wrench - 7/16”
Socket Set Phillips screwdriver Torque wrench (in-lbs.)
Phillips Screwdriver
Always!
Read all instructions before installing any Havis, Inc. products.
Check for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
HARDWARE and PARTS:
QTY DESCRIPTION PART#
1 Main upper mounting bracket CM010241
1 Lower passenger side support bracket CM010239
3 10-32 x 1/2" Machine screw GSM33118
3 #10 Flat washer GSM31003
3 #10 Split lock washer GSM31025
2 M6 x 25mm machine thread bolt GSM33712
1 VESA rotator plate CM009068
1 PVC washer CM008582
2 1/4" Plastic washer CM86600
4 1/4" Steel washer GSM31005
2 1/4" Nylock nut GSM30016
Notes:
The C-DMM-3000 swivel plate accepts C-MM-301 offset bracket used with C-MM-2XX adaptors.
C-MM-2XX series adaptor brackets are not needed for most VESA 75 and other Havis Docking Station
mounting applications.
CM009068 VESA rotator plate gives additional positioning options, but is not required depending on
mounting preference.
C-DMM-3002_INST_12-19
C-DMM-3002
Assembly
CM010241
Main upper mounting
bracket
CM009068
VESA rotator plate
CM008582
PVC washer
CM86600 - 1/4" Plastic washer
GSM31005 - 1/4" Steel washer
GSM30016 - 1/4" Nylock nut
GSM33118 - 10-32 x 1/2" screw
GSM31025 - #10 Split lock washer
GSM33118 - 10-32 x 1/2" screw
GSM31025 - #10 Split lock washer
CM010239
Lower side support bracket
GSM33712 M6 x 1.0x25mm
GSM31005 1/4” Flat washer
C-DMM-3002_INST_12-19
View of dash center instrument panel
Re-install lower dash trim.
Bracket should stick out as shown.
Attach lower side support bracket using
previously removed 7mm head fastener.
Remove the center dash top trim panel.
(8 mm socket)
On passenger side under vent, remove OEM 7mm
head fastener and slide lower side support
bracket between trim panel and dash.
Carefully remove (unsnap) lower/ center dash
panel

Product Specifications

Brand: Havis
Category: Not categorized
Model: C-DMM-3002

Do you need help?

If you need help with Havis C-DMM-3002, ask a question below and other users will answer you




Not categorized Havis User Manuals

Havis

Havis C-SW-3 Manual

15 October 2024
Havis

Havis PT-A-912 Manual

15 October 2024
Havis

Havis DS-GTC-212-3 Manual

15 October 2024
Havis

Havis CST00200 Manual

15 October 2024
Havis

Havis C-DMM-122 Manual

15 October 2024
Havis

Havis C-DMM-130 Manual

15 October 2024
Havis

Havis C-SW-2 Manual

15 October 2024
Havis

Havis DS-GTC-211-3 Manual

15 October 2024
Havis

Havis SC-1000-PB Manual

15 October 2024
Havis

Havis DS-PAN-903 Manual

15 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals