HuddleCamHD HC-JOY-G3 Manual
HuddleCamHD
Controller
HC-JOY-G3
Read below 📖 the manual in Italian for HuddleCamHD HC-JOY-G3 (11 pages) in the Controller category. This guide has been helpful for 21 people and has been rated 4.5 stars on average by 2 users
Page 1/11
Please check HUDDLECAMHD.com for
the most up to date version of this document Rev 1.1 5/19
HuddleCamHD Serial Joystick Controller
Model Number: HC-JOY-G3
Joystick Keyboard Installation & Operation Manual
Easy pan, tilt & zoom controls for any RS-232, RS485, RS422 VISCA, Pelco-P or
Pelco-D protocol camera!
Controls pan & tilt with variable speed.
Uses 3-Dimensional joystick with “twist” control for variable zoom.
Page 2 of 11
Rev 1.1 5/19
Key Product Features
• All Metal housing.
• VISCA, PELCO-D and PELCO-P protocol support.
• Large LCD Menu display.
• Key-press “BEEP” confirmation (optional – set on or off).
• Pan, tilt, zoom, iris and focus control.
• Variable speed control of pan, tilt, zoom, focus, and presets.
• Auto/Manual Focus and Iris.
• Cameras #1-6 ‘Quick Key’ Select buttons.
• Quick preset set & call (1 – 9)
• Preset Save, Call and Clear.
• Real time display of the current status.
• Short circuit and overcurrent protection.
• Automatic recovery program for the communication port(s).
• 2 Year Warranty
Key Technical Specifications
• Control Interfaces:
RS232 full-duplex, RS485 semi duplex, RS422 full-duplex.
• Variable Baud Rate 1200 to 19200 bps.
• Maximum communication distance: RS485: 3,937ft [1200m] using 24
gauge twisted pair cabling
• Can control a maximum 255 cameras via Pelco-D/P.
• Voltage: 12VDC.
• Power Consumption: 6W Max.
• Display: LCD.
• Working Temperature: 14°F ~ 122°F [-10° ~ +50° C].
• Working Humidity: 10 ~ 90% (non-condensation).
• Weight 3.3 lbs. [1.5 kg]
• Dimensions: 12.6”(W) x 7.1”(D) x 4.3”(H) [320mm x 181mm x 110mm].
Page 3 of 11
Rev 1.1 5/19
In the Box
• Keyboard with three-axis control joystick.
• 5p screw terminal plug (RS422/RS485).
• 12VDC Power Supply.
• RS232 Cable.
• This Manual.
Installation
• Power Supply Interface (5.5mm x 12mm center pin JEITA style jack):
12VDC / 2000mA power supply.
• RS485/422 interface (5p screw terminal):
1:485+/422TxA, 2:485-/422TxB, 3:422RxA, 4:422RxB, 5:485/422Gnd.
• RS232 interface (DB9M port): 2:Rx, 3:Tx, 5:Gnd.
Hardware Features
• Keys: momentary push buttons (keys).
• Joystick: 3-axis joystick.
• Digital display: LCD display.
Control Mode
• VISCA, PELCO-P and PELCO-D protocol support.
• Control interfaces:
o 5p Screw Terminal (RS485/RS422).
o DB9 (RS232).
• Baud rate: 1200, 2400, 4800, 9600, 19200.
• Parameters: 8 bits, 1 stop bit, No parity.
Product Specifications
| Brand: | HuddleCamHD |
| Category: | Controller |
| Model: | HC-JOY-G3 |
Do you need help?
If you need help with HuddleCamHD HC-JOY-G3, ask a question below and other users will answer you
Controller HuddleCamHD User Manuals
15 October 2024
Controller User Manuals
- Controller Bosch
- Controller Huawei
- Controller Panasonic
- Controller Krom
- Controller Balam Rush
- Controller Razer
- Controller StarTech.com
- Controller Axor
- Controller Hori
- Controller Bose
- Controller DataVideo
- Controller Canon
- Controller Mitsubishi
- Controller Hikvision
- Controller Valcom
- Controller Genesis
- Controller Chauvet
- Controller Vizio
- Controller MOZA
- Controller Thrustmaster
- Controller Korg
- Controller PDP
- Controller Gamesir
- Controller 8BitDo
- Controller Kanlux
- Controller HyperX
- Controller Savio
- Controller PTZ Optics
- Controller Indiana Line
- Controller Magnus
- Controller Nacon
- Controller AirTurn
- Controller Dangerous Music
- Controller PCE Instruments
- Controller Clarity
- Controller MOGA
- Controller Steelplay
- Controller Victrix
- Controller Circle
- Controller Datapath
Latest Controller User Manuals
27 October 2024
26 October 2024
26 October 2024
26 October 2024
24 October 2024
24 October 2024
23 October 2024
21 October 2024
21 October 2024
18 October 2024