Impact BHE-107 Manual

Read below 📖 the manual in Italian for Impact BHE-107 (3 pages) in the Not categorized category. This guide has been helpful for 31 people and has been rated 4.5 stars on average by 2 users

Page 1/3
BHE Series
Articulated Arms
INSTRUCTIONS
BH E-107
Two-Section Articulated Arm
B H E -117
Two-Section Double Articulated Arm
B H E -118
Three-Section Articulated Arm
B H E -119
Three-Section Double Articulated Arm
Specications
Introduction
Thank you for choosing the Impact BHE Series Articulated Arm. Often used in conjunction with a super
clamp, articulated arms can mount a camera, small light xture, or light modier onto anything a super
clamp can t around. The arms will also t into any baby receiver. Applicable whether you’re on location
or in the studio, an articulated arm is versatile, extendable, and secure, with locking and sliding arm
components.
With a camera bracket (Impact BHE-104, sold separately) on the arm, you can mount your compact,
mirrorless, or DSLR camera on anything from a riser to a bicycle to capture unique angles or points of
view. Often used for time lapse photos, articulated arms are also great for action and sports photography.
Made from durable and lightweight aluminum, all Impact BHE Series Articulated Arms feature 5/8
spigots. Each single articulated arm has either a 1/4-20 or a 3/8 threaded socket. Each double
articulated arm has a 3/8 threaded socket on one end and a hexagonal double anchor stud on the other
end. This gives the arm added strength in a super clamp. You can adjust the angle and extension of each
section of the arms and tighten both at once with a single locking knob.
Note: Always check weight limits and load capacity before attaching to location site.
Warnings
• Please read and follow these instructions, and keep
this manual in a safe place.
• Handle the unit with care.
• Clean the unit with a soft, dry cloth.
• Keep this unit away from children.
• Make sure everything is secure before proceeding.
• Make sure the item is intact and that there are no
missing parts.
• Do not exceed the maximum load capacity.
• All photos are for illustrative purposes only.
Recommended Accessories
• Impact CC-125 Gaffer Grip Clamp with two 5/8˝
mounting pins
• Impact CC-106T Super Clamp with T-Handle
• Impact CC-106R Super Clamp with Ratchet Handle
• Impact BHE-104 Camera Bracket Platform for
Holding Arms
Visit our website at www.ImpactStudioLighting.com
for more Impact accessories.
Weight
0.95 lb. (0.43 kg)
1.50 lb. (0.68 kg)
1.15 lb. (0.52 kg)
1.80 lb. (0.82 kg)
Maximum length
23.50 (59.69 cm)
23.63 (60.02 cm)
32.75 (83.19 cm)
33.75 (85.73 cm)
Maximum load capacity
3.3 lb. (1.50 kg)
11 lb. (4.99 kg)
2.2 lb. (1.00 kg)
10 lb. (4.54 kg)
Arm type
Single
Double
Single
Double
Model
BHE-107
BHE-117
BHE-118
BHE-119
Two-section
arms
Three-section
arms
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from defects
in materials and workmanship under normal consumer use for a period of one (1) year
from the original purchase date or thirty (30) days after replacement, whichever
occurs later. The warranty providers responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the provider’s discretion,
of any product that fails during normal use of this product in its intended manner and
in its intended environment. Inoperability of the product or part(s) shall be determined
by the warranty provider. If the product has been discontinued, the warranty provider
reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARR ANT Y PROVIDER MAKES NEIT HER ANY E XPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANT Y OF MERCHANTABILIT Y OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the defective
product to Impact along with the RMA number and proof of purchase. Shipment of
the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
GG2

Product Specifications

Brand: Impact
Category: Not categorized
Model: BHE-107

Do you need help?

If you need help with Impact BHE-107, ask a question below and other users will answer you




Not categorized Impact User Manuals

Impact

Impact BHE-115 Manual

17 October 2024
Impact

Impact Luxbanx Duo Manual

17 October 2024
Impact

Impact BD-27 Manual

17 October 2024
Impact

Impact BHE-107 Manual

17 October 2024
Impact

Impact CA-112 Manual

17 October 2024
Impact

Impact BHE-117 Manual

17 October 2024
Impact

Impact BD-22 Manual

17 October 2024
Impact

Impact Luxbanx Manual

17 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals