IStarUSA BPU-350SATA-KL Manual
IStarUSA
Disk array
BPU-350SATA-KL
Read below 📖 the manual in Italian for IStarUSA BPU-350SATA-KL (2 pages) in the Disk array category. This guide has been helpful for 25 people and has been rated 4.5 stars on average by 2 users
Page 1/2
BPU-350SATA 3.5”Hard Drive Cage
User’s Manual
Specification:
Order Information:
Hot Swap
5x3.5”HDD
Cooling Fan
1x80mm
Standard Drive Bays
5.25” Drive: 3
Dimension (W x H x D)
5.75 x 4.96 x 8.11 inches
Material
Aluminum Design with Conductive Dissipation
Grooves
HDD Interface
SATA / SAS
Weight
4bs
Cable
SATA Cable Included (5pcs)
Model Number:
Color:
UPC Code:
BPU-350SATA-BLACK
BPU-350SATA-RED
BPU-350SATA-BLUE
BPU-350SATA-SILVER
BPU-350SATA-BPL
(lockable handle)
Black
Red
Blue
Silver
Plastic
846813022606
846813000604
846813000598
846813000611
846813016087
Introduction:
Create more space for hard drive with hot-swap capability, by using the BPU-
350SATA HDD cage series that supports RAID 1/0/1+0/5 configuration for high
performing data recovery or redundancy application. Its aluminum construction
translates into lighter system weight and better heat dissipation. The 80mm fan
also help keeps hard drives at maximum performance temperature.
Features:
Aluminum Frame, Aluminum cover
Interface: Support SAS-I and SAS-II, SATA-I, SATA-II, SATA-III
High performance transfer rate: up to 6.0 GB/s for SAS & SATA hard drives
Plug & play, hot swappable
SATA 15Pin & 4Pin Power connectors
LED for P/S, HDD access, Fan sensor & Buzzer
Power Control Switch
3-stage temperature alarm settings & reset switch for buzzer alarm
8cm cooling fan X1
Dim: 8.11(L) X 5.75(W) X 4.96(H) inch
Patent products with advanced structure design
Patent balance handle-No skew in/out problem & avoid the abrasion during
connection
Precisely connection on connector
Hardware Information: Front View
D-1 ~ D-5: Power Switch & HDD LED. Power On: LED indicates Blue. Purple color blinking
for HDD access.
D-6: Reset Switch & Overheat LED. Power On: LED indicates Blue. Overheat (default 55º
C): LED indicate Red and buzzer alarms. Press the Reset Switch (D-6) to stop the alarm
for 3 minutes.
D-7: Fan senor LED. Fan On: LED indicates Blue. Fan Off: LED indicates Red and buzzer
alarms. Press the Reset Switch (D-6) to stop the alarm.
(If you want to switch off the “Alarm function”, press the Reset Switch (D-6) for more
than 6 seconds until 3 beeps comes out, then the “Alarm function” stopped.)
BPU-350SATA
BPU-350SATA
iStarUSA – Powered by iStarUSA Group
727 Phillips Drive
City of Industry, CA 91748
Tel: (888) 989-1189
Email: sales@istarusa.com
BPU-350SATA
Hardware Information: Rear View
POWER1: 4pin Power connector.
POWER2: 15pin Serial ATA Power connector.
(may use any two type of power connector)
HD1— HD5: 7pin Serial ATA Signal connector
JP1: Temperature setting jumper (default: 55º C)
J5: FAN RPM Switch: HIGH & AUTO Optional.
(Every time when you turn on the power, the fan runs for 10 seconds and then
stop. It will run again when temperature reaches 40º C.)
J6: HD LED Switch (default: Enable)
JP1 Jumper pin setting:
Quick Installation Procedure:
1. Open up the handle bar from the tray; take out the HD trays from the HD
cage.
2. Secure all screws to the HD attached with HD tray.
3. Place the hard drive tray(s) with HD installed, back into the cage unit.
4. Push the handling bar into closed position.
5. Connect all necessary data and power cable onto the rear end of cage
unit.
(Make sure that the date cables connected to the motherboard side as
well).
6. Turn on the Power of your computer and wait until Operating System
finish loading up.
7. Turn on all necessary HD1~HD4 Power Button(s) for each Hard Drive
installed.
Note:
For steps 6- if the operating system installed with a HD inside of HD cage, please make
sure you do turn on the Power from the cage switches D1/D2/D3/D4 or D5.
For optional RAID Configuration & Setup procedure, please follow the user manual
instructions from your SAS/SATA Controller Card or Motherboard.
Accessories:
5 SATA cables
Screws
2.5” or 3.5” Hard Drive Disk to the trays Installation:
1. Insert 2.5” or 3.5” Hard Drive into the
HDD Tray from the cage.
2. Use the provided screws and fasten HD
into highlighted 2.5” or 3.5” holes to the
cage trays.
3. Make sure Secure with screw holes from
the Bottom of 2.5” or 3.5” Hard Drive’s.
4. After the screw installation, slide the HDD
Tray back to the HDD Canister Base.
5. Next, follow the Quick Installation in next
page for the rest of the Setup.
Optional Accessories:
iStarUSAcare:
We will help you navigate our website to find the information that
you need. Go to www.istarusa.com, and click on live chat bubble
above the Search Bar
Our technicians are standing by to take your questions. Visit
http://istarusa.com/support/ , and you will receive a technical
support ticket to help track your requests from the beginning to the
end. Or you can contact us @ 888-989-1189
FCC and CE Radiation Norm
FCC
This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications
Commission (FCC) rules.
CE
This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of the law of the member
states relating to electromagnetic compatibility (89/336/EEC) according to EN 55022 Class B.
FCC and CE Compliance Statement
These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates uses
and can radiate radio frequency energy, and if not installed or used in accordance with the instructions may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the
equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the
receiving antenna, Increase the separation between the equipment and the receiver, connect the equipment into an outlet on a circuit different from
that to which the receiver is connected to.
CAUTION!
The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible
for the compliance could void the user’s authority to operate the equipment.
HD Trays
Model Number
UPC Code:
Black
Red
Blue
Silver
Plastic
BPU-HSTRAY-BLACK
BPU-HSTRAY-RED
BPU-HSTRAY-BLUE
BPU-HSTRAY-SILVER
BPU-HSTRAY
846813000635
846813000659
846813000642
846813000673
846813000628
BPU-350ATA
BPU-350SATA
BPU-350SATA
BPU-350SATA
3.5” HD Screw Holes
HD Tray: Bottom View
2.5” HD
Screw Holes
3.5” HD Screw Holes
Product Specifications
| Brand: | IStarUSA |
| Category: | Disk array |
| Model: | BPU-350SATA-KL |
Do you need help?
If you need help with IStarUSA BPU-350SATA-KL, ask a question below and other users will answer you
Disk array IStarUSA User Manuals
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
26 October 2024
Disk array User Manuals
Latest Disk array User Manuals
24 October 2024
24 October 2024
24 October 2024
13 October 2024
13 October 2024