Lewitt MTP 740 CM Manual

Lewitt Telephone MTP 740 CM

Read below 📖 the manual in Italian for Lewitt MTP 740 CM (1 pages) in the Telephone category. This guide has been helpful for 20 people and has been rated 4.5 stars on average by 2 users

Page 1/1
// Overview
// Handheld large diaphragm condenser microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Flat frequency response for natural sound
// 2 pre-attenuation settings: 0 dB, -10 dB
// 2 low-cut settings: linear, 80 Hz (6 dB/oct)
// LED status indicator for low-cut and pre-attenuation settings
// Integrated acoustic pop and windshield - washable
// Gold plated & corrosion-resistant 3-pin XLR output connector
Top applications // Vocals, acoustic instruments, studio & live
applications, spoken word and live interviews
// User interface
1 LED status indicator // Indicates active low-cut fi lter (A) and
pre-attenuation setting ( ): B
A1: linear A2: 80Hz (6 dB/oct)
B1 B2: 0 dB attenuation : -10 dB attenuation
2 LED slide switch // The LED status indicator can be turned on/off
using the slide switch.
3 Attenuation level slide switch // Choose the attenuation level
by adjusting the slide switch. Attenuation levels are: 0 dB and -10 dB.
Attenuation is used in high SPL environments in order to prevent
clipping of the microphone, mixer and other audio equipment.
4 Low-cut lter slide switch Choose between linear and //
80 Hz (6 dB/oct) settings by adjusting the slide switch. Low-cut
lters eliminate low-frequency sounds to compensate the proximity
effect and reduce structure-borne noise.
1
2
3
4
1
A
1 2
B
LEWITT
®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
// Getting started
1 Connect your microphone to your mixing console, audio interface
or microphone preamplifi er with a 3-pin XLR cable.
2 Supply the MTP 740 CM with 48V phantom power.
3 Set the input gain on your mixing console, preamp, etc. accordingly.
4 To ensure best sound quality, do not cover any part of the grille.
// Please Note
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.
// Do not apply extensive force on the switches or cable of the microphone.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.
// The integrated acoustic pop and windshield can be washed with soap water, if necessary.
READ THE
FULL MANUAL!
LEARN EVERYTHING ABOUT YOUR MTP 740 CM
www.lewitt-audio.com/resources/manuals/MTP-740-CM.pdf
// MTP 740 CM
QUICKSTART GUIDE
STUDIO TECHNOLOGY
ON STAGE
HANDHELD PERFORMANCE MICROPHONE
WITH 1-INCH STUDIO CONDENSER CAPSULE

Product Specifications

Brand: Lewitt
Category: Telephone
Model: MTP 740 CM

Do you need help?

If you need help with Lewitt MTP 740 CM, ask a question below and other users will answer you