Lorex ECP-01R Manual

Lorex Not categorized ECP-01R

Read below 📖 the manual in Italian for Lorex ECP-01R (2 pages) in the Not categorized category. This guide has been helpful for 26 people and has been rated 4.5 stars on average by 2 users

Download PDF

Page 1/2

Package

ECP-01T (Transmitter)

ECP-01R (Receiver)

Quick Start

Guide

Hardware Overview

Right

Left

Top

상태 표시등

LINK

상태 표시등

ACT

RJ45PoE 스위치 ON/OFF

(ECP-01T 만 해당)

DC 전원 어댑터BNC 커넥터

제품 고정

나사용 홀

제품 고정

나사용 홀

Status LED Indicator

LINK

Status LED Indicator

ACT

DC Power JackBNC connector

PoE Switch ON/OF

(ECP-01T only)

Mounting

Screw Hole

Mounting

Screw Hole

Overview

ECP-01 Series are High-Speed, long distance Ethernet & PoE extender

that makes possible to transmit the Ethernet signal and PoE up to

400m through coaxial cables in different situations.

It is cost-effective and time saving solution to migrate existing

analog system to IP based system since ECP-01 series support easy

installation utilizing the existing coaxial cable.

With long distance transmission feature, the device makes to

overcome 100 meters distance limitation easily and reduces the

construction cost significantly compared with fiber optic configuration.

Features



Long reach Ethernet & PoE extension over existing coaxial cable



Data + Power over coaxial cable



Data distance up to 1000 m



100Mpbs Full Duplex



PoE, PoE+, Extra PoE (Max. 60W PoE output, ECP-01T model only

with DC Power adapter)



LED Indication (Data, Power)



Plug & Play



Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR

(ECP-01R model only)



Slim design

Quick Start Guide

ECP-01T / ECP-01R

Please read carefully the instruction manual before use.

Contents of this manual are subject to change without prior notice

for reasons such as functionality enhancements.

Installation Guide

1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to

ECP-01R. Check LEDs on ECP-01R.

Ethernet cable

(Cat5e or better)

Coaxial cable

(RG59 or better)

PoE Switch/NVR

Check LEDs

Ethernet cable

(Cat5e or better)

Check LEDs

2. Connect coaxial cable (RG59 or better) to ECP-01R.

Connect coaxial cable from ECP-01R to ECP-01T.

Ethernet cable

(Cat5e or better)

Coaxial cable

(RG59 or better)

PoE Switch/NVR

Check LEDs

Ethernet cable

(Cat5e or better)

Check LEDs

3. Connect Ethernet cable (Cat5e or better) from ECP-01T to IP

Camera (PoE Model Only). Check LEDs on ECP-01T.

Set ECP-01T, PoE Switch ON to supply direct power to IP camera.

Set ECP-01T, PoE Switch OFF to connect PC or network switch

devices.

Ethernet cable

(Cat5e or better)

Coaxial cable

(RG59 or better)

PoE Switch/NVR

Check LEDs

Ethernet cable

(Cat5e or better)

Check LEDs

LED Indicators

Indicator Color Function

LINK

Ethernet Data Act

ACT

Ethernet Connect Act

Rev.6.7

Caution



Please install the device following the installation guide.



Do not touch the device and cable with wet hands.



Keep away from moisture and shock.



Do not install near any heat sources such as radiators, heat

registers, stoves or other apparatus that produce heat.



Indoor use only. (Use waterproof junction box when it is used in

outdoor)



Do not use for other purposes.



Do not disassemble or modify this device.



Do not put any sticker or paint on it.



If this device is defective or malfunctioning, please unplug the power

source immediately and contact dealer or service center.



Please use the rated power supply for the product.



Connect DC power to this device first and then to AC outlet.

Warranty



This device has passed the quality control and product inspection.



Please install and use according to the installation guide.



The warranty period for this product is 24 months from the date of

purchase.



If this device is defective or malfunctioning, please unplug the power

adapter immediately and contact dealer or service center.



Any damages or breakage from user’s abuse, accident, modification

or natural disasters will not be covered manufacturer’s warranty.

Please visit below website for more detailed information.

Web: http://www.intercoax.com Tel: +82. 31. 365. 3133~4

E-mail: info@intercoax.com Fax: +82. 31. 365. 3135

This device complies with part 15 of the fcc rules. Operation is subject to the

following two conditions :

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received including interference

that may cause undesired operation

Specification

Model ECP-01T ECP-01R

Interface

Coax

1 x 75Ω BNC (Female)

- Ethernet over Coax (B-LinX)

Ethernet 1 x RJ45 - 100 Base-T

Transmission Rate

100Mbps Full Duplex

(100Mbps between Intercoax devices)

Transmission

Distance

Ethernet

up to 400 m when 100Mbps is used

up to 1000 m when 10Mbps is used

(5C-HFBT, RG-59 or better)

PoE (PoC) up to 400meter (RG-59, RG-6)

LED

Indication

Ethernet 1 x Link (Yellow) / 1 x ACT (Green)

Power

Input B-Linx or DC48V~57V

PoE Switch or

DC48V~57V

PoE Output

IEEE802.3af (PoE),

IEEE802.3at (PoE+),

Extra PoE up to 60W

with 57V Power Adaptor

PoE Not

Supported

PoC Only

Mechanical

Dimension 83(L) x 51(W) x 24(H)mm

Weight 52g

Environment

Operating

Temp

-20 ~ 60°C

Storage

Temp

-30 ~ 80°C

Relative

Humidity

10% ~ 90%

Compliance

Certification FCC, CE, KC, RoHS

Surge

Protection

IEC 61000-4-5 4kV(1.2 / 50us),

2kA(8 / 20us)

Optional Accessories 57VDC / 1.2A External Power Supply

Applications

[Simply IP and PoE over Coax]

NVR

Coaxial Cable

ECP-01R

ECP-01T

PoE NVR

PoE

Camera

Coaxial Cable

57V DC/1.2A Power Supply

(Sold Separately)

57V DC/1.2A Power Supply

(Sold Separately)

Coaxial Cable

PoE NVR/NVR

ECP-01T

ECP-01R

PoE

Camera

PoE

Camera

[High Power over Coax]

NVR

Coaxial Cable

ECP-01R

ECP-01T

PoE NVR

PoE

Camera

Coaxial Cable

57V DC/1.2A Power Supply

(Sold Separately)

57V DC/1.2A Power Supply

(Sold Separately)

Coaxial Cable

PoE NVR/NVR

ECP-01T

ECP-01R

PoE

Camera

PoE

Camera

[Extra PoE (60W) over Coax]

NVR

Coaxial Cable

ECP-01R

ECP-01T

PoE NVR

PoE

Camera

Coaxial Cable

57V DC/1.2A Power Supply

(Sold Separately)

57V DC/1.2A Power Supply

(Sold Separately)

Coaxial Cable

PoE NVR/NVR

ECP-01T

ECP-01R

PoE

Camera

PoE

Camera

Product Specifications

Brand:	Lorex
Category:	Not categorized
Model:	ECP-01R

Do you need help?

If you need help with Lorex ECP-01R, ask a question below and other users will answer you

Your Name*

Your Email*

Write your question here

Not categorized Lorex User Manuals

Lorex ALP-ECP-2601T Manual

18 October 2024

Lorex EUP-01T Manual

18 October 2024

Lorex ECP-2601R Manual

18 October 2024

18 October 2024

18 October 2024

18 October 2024

18 October 2024

18 October 2024

14 October 2024

13 October 2024

Not categorized User Manuals

Latest Not categorized User Manuals

NightStick LGL-170A Manual

27 October 2024

Supermicro SuperServer ASG-2115S-NE332R Manual

27 October 2024

Phanteks Glacier R220C Manual

27 October 2024

Elac Protek PR-71S Manual

27 October 2024

NightStick LGL-180-IR Manual

27 October 2024

United Office IAN 54183 Manual

27 October 2024

United Office IAN 066078 Manual

27 October 2024

United Office IAN 331845 Manual

27 October 2024

United Office ULGD 350 A Manual

27 October 2024

United Office UAVS 300 A1 Manual

27 October 2024