Ltech CHLSC30RX Manual
Read below 📖 the manual in Italian for Ltech CHLSC30RX (16 pages) in the Dimmer category. This guide has been helpful for 20 people and has been rated 4.5 stars on average by 2 users
Page 1/16
LED
L125W33H20(mm)××L175W44H30(mm)××
Over current / Over-heat / Short circuit /
protection, auto recovers.
Open circuit /Reverse connection
L127W35H22(mm)××L178W48H33(mm)××
60g150g165g
F4-3AF4-5A
(0~15W...72W) × 4CH Max. 288W
(0~25W...120W) × 4CH Max. 480W
3A × 4CH Max. 12A
5A × 4CH Max. 20A
RF 2.4GHz
CV LED wireless driverCC LED wireless driver
Model
warranty
5 years
Wireless Driver
Input voltage
Output voltage
Current load
Output power
Working temperature
Package size
Product size
Weight(G.W.)
5~24Vdc
5~24Vdc
-30°C~55°C
Specification
Protection
Wireless signal
Name
RF 2.4GHz wireless signal, no need signal cable.
Dimming, CT, RGB, RGBW LED lights can be controlled.
Compatible with F series remote.
Compatible with EX series touch panel.
Support APP and intelligent speaker control if equipped with wifi-108 gateway.
Unit：mm
Product size
protection
Reverse connection
1
Internet
WiFiWiFiRF
WiFi
3G/4G
APP
Wireless driver
Wireless driver
EX series panel
EXC series panel
Wireless
LED
controller
Remote
Cloud service
Intelligent gateway
Human sensor
(programmable)
Scene panel
(programmable)
RF relay
LEDs
LEDs
LEDs
LEDs
LEDs
LEDs
LEDs
LEDs
LEDs
Wireless driver
E series panel
Triac LED driver
0-10V LED driver
DMX LED driver
RF to DMX
Wireless
Module
RF0-10V to
RF to phase-cut
Wireless connection
Wired connection
Router
Amazon ECHO
(note: only with L-BUS identity can support advanced mode.)
F4-3A
F4-5A/F4-CC
F4-CC
(1.05W~48.3W） × 4CH Max. 193.2W
12-48Vdc
3-46Vdc
CC 350/700/1050mA ×4CH
F4-3A
33
20
125
119
F4-5A/F4-CC
4
30
170
175
44
System diagram
Wireless driver
Wireless knob panel
(EX61)
Wireless knob panel
(E610P-RF)
0-10V driver
www.ltech-led.com
To avoid the signal interference, the installation needs to
keep away from the large area metal material or the metal
material space.
2
(φ5.5mm×φ2.5mm)
(5~24Vdc)
CV Wireless driver
Update Time: 2019.08.30_A3
www.ltech-led.com
Terminal description
Dimming
Dimming
Color temperature
Color temperature
RGB/RGBW control
RGB/RGBW control
LED lamp connection
LED lamp connection
ID learning button
Running light
ID learning button
5~24Vdc power input
5~24Vdc power input
DC power supply
Running light
Power indicator
Wireless driver
Wireless driver
Wireless driver
Wireless driver
Long press “ID learning button” on driver for
10 seconds, lamps flicker 5 times, If thedeactivate
the matching successfully.
Power on and off drivercontinuously 10 times,
lamps flicker 5 times, deactivate the matching successfully.
for If the
Match code (ID learning button method)
Clear code (ID learning button method)
Match code (power on method)
Clear code (power on method)
The lamps of driver flicker quickly and then stop flicking, the buzzer long beep,
match code successfully.
The lamps of driver flicker quickly and then stop flicking, the buzzer long beep,
match code successfully.
Step 1: Step 1:
Step 2: Step 2:
Step 3: Step 3:
Short press “ID learning button” on driver, the lamps
flicker, please complete step 2 within 15 seconds.
The driver power off.
Match with F series remote: Match with F series remote:
Single zone remote: Long press “On/Off” key.
Multi-zone remote: Long press the matching zone‘s “ON” & “OFF” keys
simultaneously.
Single zone remote: Hold down “On/Off” key, meanwhile the driver power on.
Multi-zone remote: Hold down the matching zone’s “On” & “Off” keys
simultaneously, meanwhile the driver power on.
Single zone panel: Long press “On/Off” key, then press any key.
Multi-zone panel: Long press “On/Off” key, then press the matching
zone key.
A. Single zone panel: Long press “ON/OFF” key until all indicator light flicking.
Multi-zone panel: Long press “ON/OFF” key until all zone’s indicator
light flicking.
C. Single zone panel: press any key on panel.
Multi-zone panel: press the matching zone key.
B. The driver power on, the lamps flicker slowly, please complete step C
within 15s.
Match with WiFi gateway:
Match with WiFi gateway:
Match with EX series panel:
Match with EX series panel:
Please match code when panel is power-on.
Please match code when panel is power-on.
*
*
Turn on APP, enter “zone set” interface, click the right top
“MATCH” key, then follow the prompts.
Turn on APP, enter “zone set” interface, click the right top
“MATCH” key, then follow the prompts.
ID learning
button
ID learning
button
No further notice if any changes in the manual.
Product function depends on the goods.
Please feel free to contact our official distributor if any question.
Dimming
Color temperature
RGB/RGBW control
LED lamp connection
Running light
ID learning button
12~48Vdc power input
Current
selection switch
Operation table
F4-5A
F4-3A
RUN
F4-CC
RUN
CV Wireless driver
CC Wireless driver
Product Specifications
| Brand: | Ltech |
| Category: | Dimmer |
| Model: | CHLSC30RX |
Do you need help?
If you need help with Ltech CHLSC30RX, ask a question below and other users will answer you
Dimmer Ltech User Manuals
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
Dimmer User Manuals
Latest Dimmer User Manuals
27 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
13 October 2024