Luxul XWC-1000 Manual
Luxul
Access point
XWC-1000
Read below 📖 the manual in Italian for Luxul XWC-1000 (8 pages) in the Access point category. This guide has been helpful for 26 people and has been rated 4.5 stars on average by 2 users
Page 1/8
Fo ld Fo ld Fo ld
READ ME FIRST
BEFORE YOU BEGIN INSTALLATION
X
Access Point Firmware: Be sure that the firmware of any APs you intend to
manage with the Wireless Controller is v5 or newer. Visit the AP Firmware
upgrade page at luxul.com/ap-upgrade for details.
X
Controller Setup Sequence: Once you configure the XWC-2000 Wireless
Controller, the Controller will automatically configure and manage all
compatible APs on the same subnet. APs can be added or removed at any
time, however. A DHCP server is required on the network.
X
Firmware Updates: The XWC-2000 Wireless Controller automatically
checks for firmware updates of Controller-compatible APs and the Wireless
Controller itself, but requires Internet access to do so. The Wireless
Controller will still operate without Internet access, but firmware updates will
not be available.
1
Physical Installation
X
Connecting Devices: The XWC-2000 Wireless Controller simply
connects to the network along with any compatible Access Points.
Wireless Controller
PoE Injector or
Compatible PoE Switch
AP
AP
LAN
Wireless Controller
XWC-2000
Package Contents:
XWC-2000 Wireless Controller
Rack mount kit
Rubber feet
Power cord
QUICK INSTALL GUIDE
Sales
801-822-5450
sales@luxul.com
Technical Support
801-822-5450
support@luxul.com
LUX-QIG-XWC-2000-v1 0811802
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2018 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply
Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and
registered trademarks are property of their respective holders.
Fo ld Fo ld Fo ld
READ ME FIRST
BEFORE YOU BEGIN INSTALLATION
X
Access Point Firmware: Be sure that the firmware of any APs you intend to
manage with the Wireless Controller is v5 or newer. Visit the AP Firmware
upgrade page at luxul.com/ap-upgrade for details.
X
Controller Setup Sequence: Once you configure the XWC-2000 Wireless
Controller, the Controller will automatically configure and manage all
compatible APs on the same subnet. APs can be added or removed at any
time, however. A DHCP server is required on the network.
X
Firmware Updates: The XWC-2000 Wireless Controller automatically
checks for firmware updates of Controller-compatible APs and the Wireless
Controller itself, but requires Internet access to do so. The Wireless
Controller will still operate without Internet access, but firmware updates will
not be available.
1
Physical Installation
X
Connecting Devices: The XWC-2000 Wireless Controller simply
connects to the network along with any compatible Access Points.
Wireless Controller
PoE Injector or
Compatible PoE Switch
AP
AP
LAN
Wireless Controller
XWC-2000
Package Contents:
XWC-2000 Wireless Controller
Rack mount kit
Rubber feet
Power cord
QUICK INSTALL GUIDE
Sales
801-822-5450
sales@luxul.com
Technical Support
801-822-5450
support@luxul.com
LUX-QIG-XWC-2000-v1 0811802
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2018 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply
Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and
registered trademarks are property of their respective holders.
Fo ld Fo ld Fo ld
READ ME FIRST
BEFORE YOU BEGIN INSTALLATION
X
Access Point Firmware: Be sure that the firmware of any APs you intend to
manage with the Wireless Controller is v5 or newer. Visit the AP Firmware
upgrade page at luxul.com/ap-upgrade for details.
X
Controller Setup Sequence: Once you configure the XWC-2000 Wireless
Controller, the Controller will automatically configure and manage all
compatible APs on the same subnet. APs can be added or removed at any
time, however. A DHCP server is required on the network.
X
Firmware Updates: The XWC-2000 Wireless Controller automatically
checks for firmware updates of Controller-compatible APs and the Wireless
Controller itself, but requires Internet access to do so. The Wireless
Controller will still operate without Internet access, but firmware updates will
not be available.
1
Physical Installation
X
Connecting Devices: The XWC-2000 Wireless Controller simply
connects to the network along with any compatible Access Points.
Wireless Controller
PoE Injector or
Compatible PoE Switch
AP
AP
LAN
Wireless Controller
XWC-2000
Package Contents:
XWC-2000 Wireless Controller
Rack mount kit
Rubber feet
Power cord
QUICK INSTALL GUIDE
Sales
801-822-5450
sales@luxul.com
Technical Support
801-822-5450
support@luxul.com
LUX-QIG-XWC-2000-v1 0811802
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2018 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply
Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and
registered trademarks are property of their respective holders.
Product Specifications
| Brand: | Luxul |
| Category: | Access point |
| Model: | XWC-1000 |
Do you need help?
If you need help with Luxul XWC-1000, ask a question below and other users will answer you
Access point Luxul User Manuals
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
Access point User Manuals
- Access point Bosch
- Access point Huawei
- Access point Lancom
- Access point TP Link
- Access point D-Link
- Access point Cudy
- Access point LevelOne
- Access point NUVO
- Access point Cambium Networks
- Access point FlyingVoice
- Access point Planet
- Access point Extreme Networks
- Access point Aruba
- Access point Trendnet
- Access point Fortinet
- Access point INCA
- Access point Mojo
Latest Access point User Manuals
26 October 2024
22 October 2024
21 October 2024
20 October 2024
19 October 2024
15 October 2024
15 October 2024
15 October 2024
13 October 2024
13 October 2024