Martin Logan Passage Manual

Read below đź“– the manual in Italian for Martin Logan Passage (16 pages) in the Not categorized category. This guide has been helpful for 31 people and has been rated 4.5 stars on average by 2 users

Page 1/16
™
P A S S A G E
™
u s e r ’ s m a n u a l
M A R T I N L O G A N
the loudspeaker technology company
®
Contents and Introduction . . . . . . . . . . . . . . . . . . .2
Contents
Introduction
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Placement
Horizontal Installation
Installing the Passage
Installing an IR Repeater . . . . . . . . . . . . . . . . . . . .9
Removing the End Caps for Painting . . . . . . . . . .10
ATF (Advanced Thin Film) . . . . . . . . . . . . . . . . . .11
Frequently Asked Questions and Troubleshooting 12
General Information . . . . . . . . . . . . . . . . . . . . . .13
Specifications
Warranty and Registration
Service
Glossary of Audio Terms . . . . . . . . . . . . . . . . . . .14
Congratulations! You have invested in a new world
of high performance audio!
The MartinLogan Passage represents the culmination of
an intensive, dedicated group research program directed
toward establishing a world class reference monitor utilizing
leading-edge technology, without compromising durability,
reliability, craftsmanship or aesthetic design.
The materials in your new Passage speaker are of the high
-
est
quality and will provide years of enduring enjoyment
and
deepening respect.
This User’s Manual will explain in detail the operation of
your Passage speaker and the philosophy applied to their
design. A clear understanding of your speaker will insure
that you obtain maximum performance and pleasure from
this most exacting transducer. It has been designed and con
-
structed to give you years of trouble-free listening enjoyment.
WARNING!
• Refer servicing to a qualified technician.
• To prevent fire or shock hazard, do not
expose this module to moisture.
• Turn amplifier off should any abnormal
conditions occur.
• Do not drive speaker beyond its rated power.
The lightning bolt flash with arrowhead symbol within
an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient mag-
nitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The fire within an equilateral triangle is intended to
alert the user to the potential of creating a fire hazard
if they do not follow the instructions.
The dollar sign within an equilateral triangle is intend-
ed to alert the user that they run the risk of causing
damage that could be potentially expensive to repair
if they don't follow the instructions.
2 Contents & Introduction
CONTENTS AND INTRODUCTION
Contents Introduction
To achieve maximum performance, it is recommended that
the Passage not be installed near a room corner or directly
behind furniture. When used as a front left/right channel, it
is recommended that the listening position be no closer to
the wall then the distance between the speakers.
Horizontal Installation
Although most users will mount the Passage in a vertical
orientation, it can also be mounted in a horizontal ori-
entation (for use as a center channel). If you plan to use
the Passage in a horizontal orientation, it will cross drywall
studs and the wall will require modification. A bonded
contractor should be contacted to mount the Passage in a
horizontal orientation.
Installing the Passage
NOTE: These instructions must be carefully followed to
assure that your Passage is safely installed. Study them
thoroughly before installing your Passage's.
NOTE: The following instructions assume the mounting
surface is of standard wood frame and standard sheet rock
construction. If you wish to mount the Passage to another
type of material, you should consult a bonded contractor.
Warning! Before installing check
for
obstructions behind the drywall
(electrical, plumbing and other
fixtures). To do this make a small
hole, cutting at a 45° angle (this
will make the hole easier to patch
if obstructions are found). Only
cut the mounting hole after
you have verified there are no
obstructions behind the wall.
Installation 3
Placement
INSTALLATION
Figure 1. The Passage is designed for both vertical and horizontal installation.

Product Specifications

Brand: Martin Logan
Category: Not categorized
Model: Passage

Do you need help?

If you need help with Martin Logan Passage, ask a question below and other users will answer you




Not categorized Martin Logan User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals