Røde RØDECaster Duo Manual
Røde
Mixing console
RØDECaster Duo
Read below 📖 the manual in Italian for Røde RØDECaster Duo (13 pages) in the Mixing console category. This guide has been helpful for 20 people and has been rated 4.5 stars on average by 2 users
Page 1/13
How to Get Started With the
RØDECaster Duo
In this section, we’ll take you through the basic setup
process for the RØDECaster Duo, including connecting
headphones and speakers, connecting and setting up
microphones, instruments and other devices, updating
firmware, and more.
Selecting a Language
After booting up your RØDECaster Duo for the first time,
you will be asked to select your default language. There are
10 languages to choose from: English, Chinese, Japanese,
Korean, French, German, Italian, Spanish and Portuguese.
The default language can be changed at any time by
tapping the settings cog and selecting ‘System’ >
‘Language’.
Date and Time
Next you will be asked to configure the time and date for
your unit. Use the rotary encoder and touchscreen to set
your local time and date. On the bottom left, you can also
select whether you would like to show the time and date on
the home screen.
RØDECaster Duo / Getting Started With The RØDECaster Duo
EN
RØDECaster Duo | How to Get Started With the RØDECaster Duo | RØDE
https://rode.com/en/user-guides/rodecaster-duo/how-to-get-started-with-the-rodecaster-duo
1 van 7
7-7-2023 09:35
Updating Firmware
Next you will be prompted to connect your RØDECaster
Duo to a computer via Wi-Fi, ethernet or USB to ensure you
are running the most up-to-date firmware. Select your
preferred connection method and follow the instructions to
establish internet connection.
The Setup Wizard
Next you will be taken through the Setup Wizard process,
which provides step-by-step instructions for configuring
your device. These steps are covered below. You can
access the Setup Wizard at any time by creating a new
‘Show’ (tap the ‘Show’ icon in the top right of the
homepage, then ‘New Show’).
Connecting Headphones
There are two outputs on the back of the RØDECaster Duo
for connecting two pairs of headphones, such as the
NTH�100, that feature high-quality 1/4-inch connectors. If
your headphones have a 3.5mm connector, use a 1/4-inch
to 3.5mm adaptor such as the RØDE HJA�4 to connect
them to the unit.
Pro Tip
If you are the host of a podcast or producing/engineering a recording, we recommend always plugging into headphone
output 1. This is because when you press the ‘Listen’ button on a fader, it will only be solo’d for headphone output 1 so you
can listen to that channel without disrupting the flow of the recording for other people in your session.
Connecting a Headset
On the front of the RØDECaster Duo, on the right-hand
side, there’s a 3.5mm TRRS input for connecting a headset
such as the NTH�100M. This input allows you to capture
your headset microphone as well as monitor audio via your
headset. The RØDECaster Duo features a dedicated
headset input channel, which you can assign to a fader to
control the headset microphone’s input level.
RØDECaster Duo / Getting Started With The RØDECaster Duo
RØDECaster Duo | How to Get Started With the RØDECaster Duo | RØDE
https://rode.com/en/user-guides/rodecaster-duo/how-to-get-started-with-the-rodecaster-duo
2 van 7
7-7-2023 09:35
Adjusting Headphone Levels
Both headphone outputs have an independent level
control. These are located at the top-right of the unit and
are labelled 1 and 2. These allow you to easily control the
volume of your headphones and balance the levels for
others you are recording with.
The ‘1’ encoder also controls the output level of the
headset connected to the headset input on the front.
You can also optimise the output level for the type of
headphones you are using (i.e., whether they are high
sensitivity or low sensitivity). To do this, tap the settings
cog, then ‘Outputs’ > ‘Headphones’, then select your
headphone type. High sensitivity models have more output
while low sensitivity models have less output. Selecting the
correct setting for your headphone type will optimise the
gain structure to make setting headphone levels as
consistent as possible.
Pro Tip
To avoid unexpected loud sounds in your headphones, we recommend always starting with your headphone levels low
before setting up your inputs for recording, then turning them up to a comfortable level.
Connecting and Using
Speakers/Monitors
There are two balanced 1/4-inch line outputs on the back
of the RØDECaster Duo for connecting a pair of
speakers/monitors. These are clearly labelled left and right.
The monitor output level is controlled using the rotary
encoder on the front of the unit and there is an icon on the
top of the mixer screen to check your level.
Pro Tip
To avoid interference or electrical noise when using speakers/monitors, we recommend using balanced TRS cables.
Monitor Output Settings
You can access two additional settings for the monitor
outputs by tapping the settings cog, then ‘Outputs’ >
‘Monitor’.
When enabled, the monitor output will automatically be
muted whenever a microphone channel fader is turned up
in order to prevent feedback.
When enabled, the Bluetooth output will be muted when a
microphone channel fader is lifted to prevent feedback.
RØDECaster Duo / Getting Started With The RØDECaster Duo
RØDECaster Duo | How to Get Started With the RØDECaster Duo | RØDE
https://rode.com/en/user-guides/rodecaster-duo/how-to-get-started-with-the-rodecaster-duo
3 van 7
7-7-2023 09:35
Product Specifications
| Brand: | Røde |
| Category: | Mixing console |
| Model: | RØDECaster Duo |
Do you need help?
If you need help with Røde RØDECaster Duo, ask a question below and other users will answer you
Mixing console Røde User Manuals
13 October 2024
Mixing console User Manuals
- Mixing console Braun
- Mixing console Philips
- Mixing console Arendo
- Mixing console Extron
- Mixing console Exquisit
- Mixing console Power Dynamics
- Mixing console Concept
- Mixing console Vonyx
- Mixing console Hyundai
- Mixing console Valcom
- Mixing console Blaze
- Mixing console Bellari
- Mixing console Karma
- Mixing console Glemm
- Mixing console SPL
- Mixing console Radial Engineering
- Mixing console DAP Audio
- Mixing console OWI
- Mixing console Dangerous Music
Latest Mixing console User Manuals
26 October 2024
20 October 2024
17 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024
15 October 2024