Rolls RA2100b Manual
Read below 📖 the manual in Italian for Rolls RA2100b (2 pages) in the Receiver category. This guide has been helpful for 31 people and has been rated 4.5 stars on average by 2 users
Page 1/2
RA Pow2100b er Ampli fer
100 WATT STEREO - 200 WATT BRIDGED
SPECIFICATIONS
Power Output, Stereo: 100 Watts RMS/ch. 4 Ω
70 Watts RMS/ch. 8 Ω
Bridged - 200 Watts RMS or 70 Volt 8 Ω
Input Connectors: 1/4" TRS balanced and RCA
Output Connectors: 5-way binding posts
tuptuo lluf rof SMRV 1<:ytivitisneS
)ttaW 1 @ zHk1( %80.<:DHT
UBd 601:oitaR N/S
Power Bandwidth: 50 Hz - 25 kHz, +/- 1 dB
Damping Factor: > 150
dnoceSorcim/stloV 001:etaR welS
zHk02 - zH02 ,.geD 01<:tfihS esahP
Input Impedance: 10 K dΩBalance
A5.2 zH06 CAV 021:rewoP
230 VAC 50Hz
”5.7 x ”5.3 x ”91:eziS
(48 x 9 x 19 cm)
)gk 5.5( sbl 21:thgieW
Quick Start Guide
ROLLS CORPORATION
SALT LAKE CITY, UTAH
09/10
CHANNEL 1 CHANNEL 2
Mosfet Power
Amplifier
RA2100b
200 Watt / 70 Volt
INTRO TIONDUC
Thank you for your purchase of the ROLLS RA2100b Power Amplifier. The
RA2100b is a stereo 100W/channel RMS power amplifier in a standard 2 rack
space format. It is intended for professional audio and distributed musical applica-
tions. The unit features 100 Watts per channel RMS into four ohms, 85 Watts per
channel into eight ohms, and for the contractor - 70 Volts / eight ohms.
The unit also features MOSFET drivers in a voltage and current gain circuit, a
one-second input turn-on delay, and LED power output meters. The RA2100b will
drive 25 Volt speaker lines directly from each channel, or 70 Volt lines bridged.
I NNSPECTIO
1. Unpack and inspect the RA2100b box and package.
If obvious physical damage is noticed, contact the carrier immediately to make a
damage claim. We suggest saving the shipping carton and packing materials for
safely transporting the unit in the future.
2. Please complete the Warranty Registration at www.rolls.com.
INSTALLATION
Connect the power cord to an AC power source, connect the input to the signal
source and to the RA2100b via the RCA or 1/4” input jacks. Speakers may be
connected by using the dual banana posts. Turn the
Volume controls fully counterclockwise (off), and turn on the power switch, the
power LED should light. With the program material running, slowly increase the
Volume controls until the desired level of sound is present. There is a one second
turn-on delay provided to prevent possible speaker damage in case all equipment
is on a signal power strip.
BRIDGING
To bridge the RA2100b, first ensure the power is off. Switch the Bridging switch to
the “Bridge” position. The Channel 1 Volume control will be the master volume,
Channel two Volume is inactive.
Connect the input to Channel 1 input, then connect the load (speakers) to the two
positive (red) banana jacks (CH1 + is + and CH2 + is now -).
Make no connections to the black posts.
FAULT PROTECTION
The ault protection in the RA2100b limits the current to the output stage in the f
faulted channel and turns on the LED for that channel. This mode is entered CLIP
whenever the output stage is called upon for too much power, it may also be
fooled by impedances lower than four ohms - which may cause the output stage
to overheat and burn up the MOSFETs.
Since the RA2100b is convection cooled, the unit radiates heat from the rear
panel and , depending on the load demand, it may become very hot if drawn upon
he vila y.
DRIVING 25 OR 70 VOLT LINES
The RA2100b will drive 25 or 70 Volt lines directly with no added transformers
when used the following way:
• Each channel will drive 25 volt lines directly.
• A single 70 volt line may be driven when the RA2100b is in Bridged mode. In
order to drive two 70 volt lines, two 8 ohms to 70 Volt conversion transformers will
be needed.
SCHEMATIC
1
ROLLS CORPORATION
5143 South M n tai Stree
Salt L e City, U 84107ak T
128-Jun-1999
T e RA 0 POWER AMP BOARDitl 20
Siz nte: Docume Number:
Date:
Rev:
Sheet of
Rb
Vr+
Vr-
V+
V-
Vr-
V-
V+
V+
Vr+
Vr-
Vr+
Vr-
V-
V+
V+
Vr-
Vr+
V+
Vr+
Vr+
Vr-
4
1
3
2
1
23
1
2
3
4
5
6
4
1
2
3
5
1
2
6
5
7
8
6
5
7
8
2
3
1
4
2
3
1
4
1
2
3
4
t
1
1
1
1
1
3
2
3
RA2 SC00. H
Product Specifications
| Brand: | Rolls |
| Category: | Receiver |
| Model: | RA2100b |
Do you need help?
If you need help with Rolls RA2100b, ask a question below and other users will answer you
Receiver Rolls User Manuals
17 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
Receiver User Manuals
- Receiver Sony
- Receiver Bosch
- Receiver Brondi
- Receiver Jensen
- Receiver Hartke
- Receiver Goobay
- Receiver Avantree
- Receiver Cayin
- Receiver Axton
- Receiver Kogan
- Receiver Yamaha
- Receiver Extron
- Receiver Lindy
- Receiver Pioneer
- Receiver NuPrime
- Receiver Ecler
- Receiver AudioControl
- Receiver Rotel
- Receiver Toa
- Receiver Marantz
- Receiver Pyle
- Receiver Wet Sounds
- Receiver JVC
- Receiver VMV
- Receiver S.M.S.L
- Receiver Kicker
- Receiver Auna
- Receiver OSD Audio
- Receiver Power Dynamics
- Receiver DataVideo
- Receiver Audizio
- Receiver Vonyx
- Receiver Bluesound
- Receiver Blackstar
- Receiver Cambridge
- Receiver MB Quart
- Receiver Aplic
- Receiver CSL
- Receiver NUVO
- Receiver Block
- Receiver Smart-AVI
- Receiver Advance
- Receiver Artsound
- Receiver Denon
- Receiver Yorkville
- Receiver Valcom
- Receiver Mosconi
- Receiver JBL
- Receiver Helix
- Receiver Soundstream
- Receiver Bellari
- Receiver Ground Zero
- Receiver Karma
- Receiver Glemm
- Receiver EA
- Receiver Match
- Receiver Renkforce
- Receiver Scansonic
- Receiver SPL
- Receiver Audiotec Fischer
- Receiver Crunch
- Receiver A-NeuVideo
- Receiver Classé
- Receiver FoneStar
- Receiver Monitor Audio
- Receiver Peavey
- Receiver Crown
- Receiver Fosi Audio
- Receiver Graupner
- Receiver Antelope Audio
- Receiver Vaddio
- Receiver ESX
- Receiver Omnitronic
- Receiver Russound
- Receiver MEE Audio
- Receiver GigaBlue
- Receiver Mx Onda
- Receiver Black Hydra
- Receiver Electro-Voice
- Receiver Boss
- Receiver JL Audio
- Receiver Shanling
- Receiver Atlas Sound
- Receiver Ashly
- Receiver Audiolab
- Receiver Memphis Audio
- Receiver AVM
- Receiver Primare
- Receiver PureLink
- Receiver Kramer
- Receiver ATen
- Receiver Blustream
- Receiver Yaesu
- Receiver Musical Fidelity
- Receiver RDL
- Receiver Dynacord
- Receiver Ferguson
- Receiver DAP Audio
- Receiver REL Acoustics
- Receiver Inovonics
- Receiver BZBGear
- Receiver Ram Audio
- Receiver Strong
- Receiver Phoenix Gold
- Receiver HiFi ROSE
- Receiver Intelix
- Receiver Comprehensive
- Receiver Deaf Bonce
- Receiver Fiio
- Receiver Lab Gruppen
- Receiver GlobalSat
- Receiver AVMATRIX
- Receiver Koda
- Receiver Technical Pro
- Receiver Marshall Electronics
- Receiver Naim
- Receiver Anthem
- Receiver Audison
- Receiver Hifonics
- Receiver Geemarc
- Receiver Loxjie
- Receiver Clare Controls
- Receiver Edwards Signaling
- Receiver Hegel
- Receiver August
- Receiver PTN-electronics
Latest Receiver User Manuals
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024
27 October 2024