Soundcore Sport X20 Manual

Soundcore Headphones Sport X20

Read below 📖 the manual in Italian for Soundcore Sport X20 (22 pages) in the Headphones category. This guide has been helpful for 23 people and has been rated 4.5 stars on average by 2 users

Download PDF

Page 1/22

APP

Download the soundcore app to experience adaptive noise cancelling, HearID sound, custom EQ, ﬁrmware update, and more exciting features.

If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.

Click this link to download: http://dl-soundcore.soundcore.com/qcdl?ﬂow=soundcore

OVERVIEW

1. Adjustable & Rotatable Earhook

2. Charging Contactors

3. Eartip

4. Multi-function Button

5. Charging Case Button

6. USB-C Charging Port

PAIRING

After removing the insulation stickers on the earbuds, return earbuds to the charging case, then activate Bluetooth pairing by closing and reopening the

case lid. Subsequently, the earbuds will automatically power on and enter Bluetooth pairing mode. Select "soundcore Sport X20" from your device's

Bluetooth list when connecting for the ﬁrst time.

• When pairing, the LED light strip will start ﬂashing white. After the pairing is successful, the LED light strip will stay on for 2 seconds and then go off.

* When taken out, the earbuds will automatically power off after 30 minutes if they are not connected. The duration can be set in the soundcore app.

WEARING

1. Choose the ear tips that ﬁt your ears best and take a ﬁt test in the soundcore app to ensure you get the best ANC performance.

2. Lift and bend the earhooks around your ears for a secure and comfortable ﬁt.

3. Insert the earbuds into the inner canal of your ears and turn gently until you ﬁnd the most comfortable and secure position.

Tips: For a more comfortable wearing experience, hold the stems of the adjustable and rotatable earhooks and stretch them to an appropriate

length.

* Dust, earwax or other debris can accumulate in the earbuds. To maintain optimal sound quality, regularly clean your earbuds via using a cotton swab slightly

moistened with rubbing alcohol to gently wipe the metal mesh ﬁlter under the rubber ear tips.

CHARGING

1. Place the earbuds in the charging case and close it.

• Fully dry off the earbuds and the USB-C charging port before charging.

2. Connect the charging case to a power supply by using the provided USB-C charging cable

PAIRING WITH ANOTHER DEVICE

To pair with another device, place the earbuds in the charging case and leave the case open. Press and hold the charging case button for 3 seconds until the

LED light strip ﬂashes white rapidly.

CONTROLS

TWS mode Mono mode

Play / Pause Press once (L/R) Press once

Previous track Press twice (L) /

Next track Press twice (R) Press and hold for 2 seconds

Answer a call Press once (L/R) Press once

Hang up Press and hold for 2 seconds (L/R) Press and hold for 2 seconds

Reject a call Press and hold for 2 seconds (L/R) Press and hold for 2 seconds

Switch ambient sound modes

(ANC / Transparency)

Press and hold for 2 seconds (L/R) /

* You can also customize controls in the soundcore app.

AMBIENT SOUND

You can select Noise Cancellation, Normal, or Transparency mode in the soundcore app.

• Adaptive ANC: Optimize noise cancellation by adapting to the surrounding environment.

• Transparency: Stay aware of your surroundings while listening to music.

POWERING ON OR OFF

With the Charging Case

Once connected successfully in ﬁrst-time use, the earbuds will automatically reconnect to your device every time you open the charging case, as long as you

haven't deleted the pairing history from your device.

To power off, return both earbuds to the charging case and close it.

* When returning the earbuds to the charging case, make sure that you carefully align the charging contactors between the earbuds and charging case. If

either earbud is successfully back into the case, the LED light strip will light up in white and then go off.

Without the Charging Case

To power on a single earbud, press and hold the multi-function button of the corresponding earbud for 3 seconds.

To power off a single earbud, press and hold the multi-function button of the corresponding earbud for 10 seconds.

RESET

You might need to reset the earbuds if you experience any connectivity problems or function issues.

Place the earbuds in the charging case and leave the case open. Press and hold the charging case button for 10 seconds until the LED light strip ﬂashes white

rapidly three times.