TP Link Omada DS116GE Manual

TP Link Not categorized Omada DS116GE

Read below 📖 the manual in Italian for TP Link Omada DS116GE (3 pages) in the Not categorized category. This guide has been helpful for 23 people and has been rated 4.5 stars on average by 2 users

Page 1/3
Wall Mounting Guide
Wall Mountable Switches
© 2023 TP-Link 1910013579 REV1.0.0
1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below:
A screw driver.
Two screws which complies to the corresponding standard. For details, see Wall
Mounting Specication.
1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws
into the wall, then mount the switch on the wall. Note that the switch should be mounted
on the wall upright rather than sideways. For TL-SF1008P/TL-SF1008LP/TL-SF1009P/
TL-SG1008P, the switch should be mounted with the ports facing downward and the
LEDs facing upward.
1) Determine the location on the wall where you want to mount the switch.
2) Mark the wall where the two mounting holes are. The distance between the two marks
must be the same as that between the two mounting holes of the switch. For the wall-
mounting-holes distance, see Wall Mounting Specication.
3) Drive the screws into the wall at the marks using the screw driver. For the Screw-
Head-to-Wall Minimum Distance, see Wall Mounting Specication.
4) Mount the switch on the wall.
1.3 Wall Mounting Specication
Model
Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
7 mm
1.5mm
mm
4#, (5#), 6# 1.5mm mm
4#, (5#), 6# 1.5mm mm
1.5mm mm
4#, (5#), 6# .5mm 1.5mm
mm
4#, (5#), 6#, 8# 8.5mm 1.5mm mm
4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
4#, (5#), 6#, 8# .5mm 1.5mm
4#, (5#), 6# .5mm 1.5mm 1 mm
4#, (5#), 6# .5mm 1.5mm 1 mm
8.5mm 1.5mm mm
4#, (5#), 6# 8.5mm 1.5mm
mm
4#, (5#), 6# 8.5mm 1.5mm
mm
DS110GMP2C
Model
Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
D S111P 4#, (5#), 6# 8.5mm 1.5mm 150mm
D S116 GE 4#, (5#), 6# 8.5mm 1.5mm 200mm
ES205G 4#, (5#), 6# 11m m 4.5mm 52mm
ES205GP 4# 10mm 4.5mm 39mm
ES210GP 4#, (5#), 6# 8.5mm 1.5mm 150mm
Festa FS308G 4#, (5#), 6# 8.5mm 1.5mm 150mm
Festa FS308GP 4#, (5#), 6# 8.5mm 1.5mm 150mm
Festa FS310GP 4#, (5#), 6# 8.5mm
1.5mm 150mm
LS1005G 4#, (5#), 6# 8.5mm 2.5mm 38mm
LS1008G 4#, (5#), 6# 8.5mm 2.5mm 48mm
LS105G 4#, (5#), 6# 7.5mm 1.5mm 76mm
LS105GP 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS105LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
LS106LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
LS108G 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS108GP 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS109P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
LS1210 GP 4#, (5#), 6# 7.5mm 1.5mm 150mm
S4500-16GP 4#, (5#), 6# 8.5mm 1.5mm 200mm
S4500-8G 4#, (5#), 6# 8.5mm 1.5mm 150mm
S4500-8GP 4#, (5#), 6# 8.5mm 1.5mm 150mm
S4500-8GP2F 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2008 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2008P 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2016P 4#, (5#), 6#
8.5mm 1.5mm 200mm
SG2210P 4#, (5#), 6#
8.5mm 1.5mm 150mm
SG2210XMP-M2 4#, (5#), 6#
8.5mm 1.5mm 150mm
T1500G-8T 4#, (5#), 6#
8.5mm 1.5mm 150mm
TL-RP108GE
4#, (5#), 6# 8.5mm 1.5mm 65mm
TL-SF1005LP
4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SF1005P
4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

Product Specifications

Brand: TP Link
Category: Not categorized
Model: Omada DS116GE

Do you need help?

If you need help with TP Link Omada DS116GE, ask a question below and other users will answer you




Not categorized TP Link User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals