Vello RW-P1K Manual

Vello Remote control RW-P1K

Read below 📖 the manual in Italian for Vello RW-P1K (20 pages) in the Remote control category. This guide has been helpful for 31 people and has been rated 4.5 stars on average by 2 users

Download PDF

Page 1/20

20 1

One-Year Limited Warranty

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of

one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect

to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product

in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has

been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS

PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING

BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you

with speciﬁc legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the

defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group.

GG2

USER MANUAL

FREEWAVE

Thank you for choosing the Vello

FreeWave Wireless Remote Shutter

Release. This device triggers your

camera wired or wirelessly, allowing

you to trip the shutter without

disturbing the camera. It’s ideal for

taking pictures of subjects that are

dicult to approach, such as wildlife. It

also eliminates vibrations caused by

pressing your camera’s shutter release

button during macro, close-up, or

long-exposure photography. The

two-second delay function is great for

self-portraits.

Unlike infrared remotes, which

won’t work if the receiver is not

in direct line-of-sight of the

transmitter, the FreeWave uses

radio frequencies. Radio waves

can pass through and around

objects such as walls, windows,

and ﬂoors. You can even trigger your

camera around corners.

The FreeWave can transmit over

16,000,000 possible channels, and there

are no dip switches to set. The device

conﬁgures with the press of a button.

Your Vello FreeWave

Wireless Remote Shutter Release

kit contains:

Wireless RF Receiver,

Wireless RF Transmitter,

Camera Release cable,

Battery, Lanyard, and Clip.

INTRODUCTION

2 19

This equipment generates, uses, and can

radiate radio frequency energy, and if

not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

This equipment has been tested and

found to comply with the limits for a

Class B digital device pursuant to Part

15 of the FCC Rules. These limits are

designated to provide reasonable

protection against harmful interference

in a residential installation.

There is no guarantee that interference

will not occur in a particular installation.

If this equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment ON or OFF, the

user is encouraged to try to correct the

interference by one or more of the

following measures:

1. Reorient or relocate the

receiving antenna;

2. Increase the distance between

the equipment and the receiver.

This device complies with Part 15,

Subpart B, Class B of the FCC Rules.

Operation is subject to the following

two conditions:

1. This device may not cause harmful

interference;

2. This device must accept any

interference received,

including interference that may

cause undesired operation.

Any changes or modiﬁcations (including

the antennae) made to this device that

are not expressly approved by the

manufacturer may void the user’s

authority to operate the equipment.

FCC COMPLIANCE

Smart Code: 16,000,000 possible

radio channels. No dip switches to

set. One transmitter can trigger

multiple receivers.

Extended Range: up to 100m

(320 ft.)

Multi-function: Trigger your camera

wirelessly or wired. Wired

triggering works even if the battery

in the receiver is dead or missing.

Versatile: One receiver works with

dozens of camera models. Just swap

out the camera release cable.

KEY FEATURES

18 3

Dual-Function Release: Press

halfway to focus; press full to trigger

shutter.

Delayed Release: Two-second delay

function gives you extra time to get

into position.

Multi-exposure: Take multiple shots

with one press of the trigger.

Long Exposure: Control the length of

the exposure remotely.

LED indicators: Conﬁrm pre-focus

and exposure during wireless mode.

Troubleshooting

Problems with the FreeWave can be

traced to the following most common

causes. Perform the following steps to

diagnose the problem:

• Check that the shutter release cable is

in good condition and is properly

connected.

• Make sure that the Receiver switch

has not been set to Hold.

• Remove the battery from the

Receiver, reinsert it, and reset the

Smart Code.

SPECIFICATIONS | TROUBLESHOOTING

Power

Battery Life

Smart Code Channels

Range

Frequency

Conﬁrmation LEDs

Shutter Modes

Tra nsmi tt er

12V / 23A

up to 3 years

Receiver

3V / CR2

approx. 20,000 triggers

16,000,000 possible codes

100m (320 ft) with no obstructions

433 MHz

2 color

single shot, 2-second delay, continuous, & bulb

Product Specifications

Brand:	Vello
Category:	Remote control
Model:	RW-P1K

Do you need help?

If you need help with Vello RW-P1K, ask a question below and other users will answer you

Your Name*

Your Email*

Write your question here

Remote control Vello User Manuals

Vello IR-O1 Manual

15 October 2024

Vello IR-STV Manual

15 October 2024

Vello RW-P1K Manual

15 October 2024

Remote control User Manuals

Latest Remote control User Manuals

PeakTech 2802 Manual

27 October 2024

Hegel RC8 Manual

27 October 2024

Insignia NS-RCFNA-21 Manual

26 October 2024

Hama Spot-Pointer V2 Manual

26 October 2024

Sony DSRM-10 Manual

24 October 2024

Sony CCU-D50P Manual

24 October 2024

Sony AP-1 Manual

24 October 2024

MIOPS RemotePlus Manual

22 October 2024

Control4 Halo Manual

21 October 2024

Geemarc TV-Photo 100 Manual

19 October 2024