MuxLab 500816-IP Manual
Read below 📖 the manual in Italian for MuxLab 500816-IP (21 pages) in the Router category. This guide has been helpful for 33 people and has been rated 4.5 stars on average by 2 users
Page 1/21
8 Button IP PoE Control Panel Installation & Operation Manual
© MuxLab Inc. 2023 94-001000-A / SE-001000-A Page 1 / 21
8 Button IP PoE Control Panel
Installation and Operation Manual
500816-IP-V2
8 Button IP PoE Control Panel Installation & Operation Manual
© MuxLab Inc. 2023 94-001000-A / SE-001000-A Page 2 / 21
Introduction
The 8 Button IP PoE Control Panel (Model: 500816-IP-V2) is a versatile wall or
table-top mounted control panel for MuxLab AV over IP devices, select Matrix
Switches, and third party products. Each button is programmable. The unit supports
one (1) Ethernet port (for TCP/IP, Telnet, HTTP and UDP), two (2) RS-232 ports, one (1)
Infrared port, and two (2) Relay ports, for control of end devices. The 8 Button IP PoE
Control Panel can control MuxLab products including MuxLab’s AV over IP system via
the 500812 ProDigital Network Controller, MuxLab’s TCP/IP, Telnet and RS-232
managed Matrix Switches, as well as third party devices such as projectors and
projector screens, displays, AV sources and other similar devices.
The 500816-IP-V2 supports a web interface, allowing it to be configured and
managed via a browser. The web interface allows the unit keys to be programmed
individually, supports IR learning and unit configuration.
Panel Description
Front panel view:
All buttons can be programed to control each TCP/IP, Telnet, HTTP, UDP, RS-232, IR,
and Relay controllable end device. Each key supports a removable clear plastic cover,
allowing a label to be inserted to reflect the programming of each button.
8 Button IP PoE Control Panel Installation & Operation Manual
© MuxLab Inc. 2023 94-001000-A / SE-001000-A Page 3 / 21
Rear panel view:
1. Power: DC Power Input supporting 12-24VDC (12VDC@1A is recommended)
2. Relay #1: An electrically operated switch
3. IR output power jumper: jumper left 2 pins for 5V, or right 2 pins for 10V.
4. Relay #2: An electrically operated switch
5. IR: Infrared radiation digital data output
6. Rs232 #2: RS-232 data output
7. Rs232 #1: RS-232 data output
8. LAN (PoE): LAN port with PoE (PD) power for web interface control
Top panel view:
1. IR reader: Learning IR sensor, supporting a frequency of 38KHz
Product Specifications
| Brand: | MuxLab |
| Category: | Router |
| Model: | 500816-IP |
Do you need help?
If you need help with MuxLab 500816-IP, ask a question below and other users will answer you
Router MuxLab User Manuals
17 October 2024
15 October 2024
Router User Manuals
- Router Xiaomi
- Router Bosch
- Router Huawei
- Router HP
- Router Lancom
- Router TP Link
- Router D-Link
- Router StarTech.com
- Router Kogan
- Router Asus
- Router Cudy
- Router Netgear
- Router Hikvision
- Router Mikrotik
- Router Keezel
- Router Silentwind
- Router Alcatel
- Router Ubiquiti Networks
- Router SPL
- Router A-NeuVideo
- Router Atlona
- Router Luxul
- Router Teltonika
- Router Starlink
- Router Kramer
- Router ATen
- Router Blustream
- Router Milesight
- Router Arris
- Router Tenda
- Router Draytek
- Router WyreStorm
- Router KanexPro
- Router Alfatron
- Router Digitalinx
- Router Intelix
- Router Comprehensive
- Router Ocean Matrix
- Router Sabrent
- Router Predator
- Router FSR
- Router PulseAudio
- Router Alfa
- Router Amped Wireless
- Router Keewifi
- Router Keenetic
Latest Router User Manuals
27 October 2024
26 October 2024
24 October 2024
24 October 2024
20 October 2024
19 October 2024
19 October 2024
18 October 2024
18 October 2024
18 October 2024