Techno Line WS 9245-IT Manual
Techno Line
Weather station
WS 9245-IT
Read below 📖 the manual in Italian for Techno Line WS 9245-IT (30 pages) in the Weather station category. This guide has been helpful for 25 people and has been rated 4.5 stars on average by 2 users
Page 1/30
18
WIRELESS 868 MHz TEMPERATURE STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this temperature station with wireless 868 MHz
transmission of outdoor temperature and display of indoor temperature. With two easy to
use function keys, this innovative product is ideal for use in the home or office
FEATURES:
Temperature station
Stand
Hanging
hole
Battery
compartment
LCD displa
y
Function
keys
19
The Temperature Station
Manual time setting (hour and minute display)
Time display 24-hour time format
Temperature display in degree Celsius (°C)
Indoor and outdoor temperature display with MIN/MAX records
Low battery indicator
Wireless transmission at 868 MHz
Signal reception intervals at 8 seconds
Wall mounting or table standing
The Outdoor Temperature Transmitter
Remote transmission of outdoor temperature to Temperature
Station by 868 MHz signals
Rain proof casing
Wall mounting and table-standing
Mounting at a sheltered place. Avoid direct rain and
sunshine
SETTING UP:
Note: this temperature station can only receive one transmitter only.
20
1. First, insert the batteries to the transmitter (see “How to install and replace
batteries in the Temperature transmitter” below).
2. Within 30 seconds of powering up the transmitter, insert the batteries to the
Temperature Station (see “How to install and replace batteries in the
Temperature station” below). Once the batteries are in place, all segments of the
LCD will light up briefly. Following the indoor temperature, the time as 0:00 will be
displayed. If they are not shown in LCD after 60 seconds, remove the batteries and
wait for at least 60 seconds before reinserting them. Once the indoor data is
displayed user may proceed to the next step.
3. After the batteries are inserted, the Temperature Station will start receiving data
signal from the transmitter. The outdoor temperature should then be displayed on
the Temperature station. If this does not happen after 2 minutes, the batteries will
need to be removed from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, this should under
good conditions be a distance no more than 60 meters between the final position of
the Temperature Station and the transmitter (see notes on “Positioning” and “868
MHz Reception”).
Product Specifications
| Brand: | Techno Line |
| Category: | Weather station |
| Model: | WS 9245-IT |
Do you need help?
If you need help with Techno Line WS 9245-IT, ask a question below and other users will answer you
Weather station Techno Line User Manuals
26 October 2024
15 October 2024
14 October 2024
Weather station User Manuals
- Weather station Braun
- Weather station Fluke
- Weather station La Crosse Technology
- Weather station GoGEN
- Weather station Sencor
- Weather station Livoo
- Weather station Brandson
- Weather station Bearware
- Weather station Hyundai
- Weather station Muse
- Weather station TFA
- Weather station Renkforce
- Weather station Davis
- Weather station Setti+
- Weather station GlobalTronics
- Weather station Otio
- Weather station Baldr
- Weather station Oregon Scientific
Latest Weather station User Manuals
27 October 2024
25 October 2024
24 October 2024
21 October 2024
20 October 2024
19 October 2024
19 October 2024
15 October 2024
15 October 2024
15 October 2024