Speco Technologies H4FB2M Manual

Read below 📖 the manual in Italian for Speco Technologies H4FB2M (2 pages) in the Not categorized category. This guide has been helpful for 31 people and has been rated 4.5 stars on average by 2 users

Page 1/2
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
FEATURES
4MP Flexible IntensifierÂŽ HD-TVI Bullet Camera
with Junction Box, Wall/Ceiling Mount, Dual voltage
H4FB2M
– 2.7~12mm motorized zoom focus lens, dark gray housing
SPECIFICATIONS
Image Sensor.................. 1/2.8” SONY Starvis 5MP Sensor
Minimum Illumination....... 0.00 lux (IR LED ‘on’)
Effective Pixels................ 2616 (H) x 1964 (V)
Total Pixels...................... 2704 (H) x 2104 (V)
Scanning System............ Progressive
S/N Ratio......................... More than 50dB
Video Output.................... 1.0Vp-p / 75 Ohms
Electronic Shutter............ Auto / Manual (1/30 – 1/30,000 sec.)
WDR................................ On (Low / Middle / High) / Off
Day / Night....................... Auto / Intensifier
Test Monitor Output......... TVI out
Power............................. 12VDC / 24VAC
Power Consumption........ 900mA max. (DC), 700mA max. (AC)
Operating Temperature.... -40
° F – 140
° F
Unit Dimensions.............. 9.64” (L) x 3.72” (Dia.)
Unit Weight...................... 2 lbs (camera), 0.9 lbs (junction box)
Certifications.................... FCC, RoHS
• Flexible Intensifier Technology
ÂŽ
fits any lighting application
• Supports 4MP @ 30FPS
• True WDR operation
• Adaptive IR LED’s
• Presets: Outdoor, Low Light, Hallway, Lobby, Elevator, Indoor
• Built-in heater and anti-fog glass reduces condensation
• 3-axis for wall and ceiling mounting
• Full OSD and Zoom / Focus control through on-board and UTC
• Signal distance up to 1600 feet*
• Vandal / tamper resistant
• IP67 compliant, weather resistant
• 12VDC & 24VAC dual voltage operation
• 5 year warranty
OSD MENU TREE
PRESET MODE
• OUTDOOR
• INDOOR
• LOW LIGHT
• LOBBY
• HALLWAY
• ELEVATOR
MAIN SETUP
EXPOSURE
• LOW • MIDDLE • HIGH
• SHARPNESS • GAMMA • MIRROR
• FLIP
DAY / NIGHT
COLOR
SPECO DNR
IMAGE
EXIT
• BRIGHTNESS • SHUTTER
BACKLIGHT
• HLC• BLC
• WDR
• AUTO
• AWB • COLOR GAIN
• ACE • DEFOG
SYSTEM
• INTENSIFY • AGC
• INTENSIFIER
IRIS
MOTION
• SHADING
• CAMERA TITLE
• COMM • IMAGE RANGE
• COLOR SPACE
• OUTPUT
• LANGUAGE
• COLOR BAR
• RESET
OSD CONTROL
• D-ZOOM
• PRIVACY
MOTORIZED
INTCM1
(Pole/Corner Mount)
DIMENSIONS
Camera
Optional Accessories
Unit : inch
Junction Box
included
OSD Joystick
Video Test (TVI OUT)
Right (Near)
Up (Zoom-In)
Down (Zoom-Out)
Left (Far)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation.
Rev. 240315
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
OSD MENU Details
BACKLIGHT : Adjusts backlight options.
WDR : WDR illuminates darker areas of an image while retaining the
same light level for brighter areas to even out the overall brightness
of images with high contrast between bright and dark area
- Adjusts the WDR Weight (LOW/MIDDLE/HIGH)
BLC : Produces a clearer image of an object darkened by strong backlighting.
- H-POS : Adjusts the horizontal position(0~20)
- V-POS : Adjusts the Vertical position(0~20)
- H-SIZE : Adjusts the horizontal block size (0~20)
- V-SIZE : Adjusts the vertical block size (0~20)
HLC : Uses to contain extremely bright areas such as from car headlight,
the light can be masked out much of the on-screen details.
IMAGE : Adjusts various image options.
SHARPNESS : Adjusts sharpness level. Increasing this value, the picture
outline becomes stronger and clear. (0~10)
GAMMA : Sets the desired Gamma value. (0.45 ~ 0.75)
MIRROR : Change the video direction horizontally.
FLIP: Change the video direction perpendicularly.
D-ZOOM : Digital zoom up to p2-x8 will be activated.
ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over
saturated areas within the image.
DEFOG : Activated this mode when the video or the weather is foggy.
SHADING : Sets the Lens Shading Compensation value. (ON/OFF)
PRIVACY : Used to hide regions of the image.
IRIS : ‘ALC’ as a default value
EXPOSURE : adjusts exposure settings.
BRIGHTNESS : Adjusts image brightness. (0~ 20)
SHUTTER : Outdoor / Indoor / Deblur
INTENSIFY : Sets the desired multiple of the digital exposure length.
AGC(Auto Gain Control): Adjusts the AGC level. (0~10)
4MP Flexible IntensifierÂŽ HD-TVI Bullet Camera
with Junction Box, Wall/Ceiling Mount, Dual voltage
H4FB2M
– 2.7~12mm motorized zoom focus lens, dark gray housing
DAY / NIGHT : Adjust Day / Night options.
AUTO : Day / Night is switching automatically
- ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
- D > N THRES : Adjusts AGC THRES (0~20)
- N > D THRES : Adjusts AGC THRES (0~20)
- DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)
INTENSIFIER : Always Color mode
COLOR : Adjusts white balancing options.
AWB : it goes to optimized color level automatically.
COLOR GAIN : Sets the desired Color Gain value (0~20)
SPECO DNR : Uses to reduce the background noise in a low luminance
environment with 2D + 3D filtering system.
MOTION : Adjust motion detection settings.
DET WINDOW
SENSITIVITY : Sets the desired of “Motion” (0~20)
MOTION OSD
TEXT ALARM
SIGNAL OUT
SYSTEM : Adjusts various camera system options.
COMM.
- CAM ID : Sets the camera ID for the RS-485 (0~255)
- BAUD RATE : Sets the baud rate for the RS-485 (2400~115200).
OUTPUT
FRAME RATE 1440p 30
1080p 30
720p 30
1944p 12.5
1944p 20
2160p 15
CONFIRM YES
IMAGE RANGE
COLOR SPACE
COLOR BAR : Manufacturer’s option
LANGUAGE : Sets the desired OSD language
CAM TITLE
RESET: Press with long to reset all settings to factory defaults.

Product Specifications

Brand: Speco Technologies
Category: Not categorized
Model: H4FB2M

Do you need help?

If you need help with Speco Technologies H4FB2M, ask a question below and other users will answer you




Not categorized Speco Technologies User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals