Speco Technologies HT7246T2 Manual

Read below 📖 the manual in Italian for Speco Technologies HT7246T2 (2 pages) in the Not categorized category. This guide has been helpful for 28 people and has been rated 4.5 stars on average by 2 users

Page 1/2
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
FEATURES
Intensifier® Series HD-TVI 1080p 2MP Dome Camera
Wall/Ceiling Mount, UTC, 2BNC out for TVI & CVBS, Dual voltage
HT7246T2 2.8~12mm auto iris lens, dark gray housing
SPECIFICATIONS
Image Sensor.................. 1/2.9Progressive Scan CMOS, 2MP
Minimum Illumination....... 0.001 lux (Sens-up X32)
Effective Pixels................ 1984 (H) x 1105 (V)
Total Pixels...................... 2000 (H) x 1121 (V)
Scanning System............ Progressive
S/N Ratio......................... More than 50dB
Output Resolution............ 1920x1080 @ 30fps
Video Output.................... 1.0Vp-p / 75 Ohms
Electronic Shutter............ Auto / Manual (1/30 – 1/30,000 sec.)
Day / Night....................... Color (default) / BW / External / Auto
Test Monitor Output......... CVBS (Yellow BNC / Connector on Board)
Communication............... UTC (up the coax)
Power............................. 12VDC / 24VAC
Power Consumption........ 450mA max. (DC), 250mA max. (AC)
Operating Temperature.... -40° F 140° F
Unit Dimensions.............. 3.97(H) x 5.23” (Dia.)
Unit Weight...................... 1.4 lbs (camera), 0.7 lbs (junction box)
Certifications.................... FCC, RoHS
Signal Distance............... Up to 1600 feet
(depending on coax quality)*
Full HD resolution over coax (HD-TVI)
• Supports up to Full HD 1080p @ 30fps
True WDR operation
Superior low-light performance
Amplify existing light with no distance limitation
Presets: Outdoor, Low Light, Hallway, Lobby, Elevator, Indoor
• Built-in heater and anti-fog glass reduces condensation
• 3-axis for wall and ceiling mounting
Chameleon Cover : snaps on and can be painted to
match any décor!*
Full OSD operation through on-board control and UTC (up the coax)
Additional 960H analog output
Signal distance up to 1600 feet*
Vandal / tamper resistant
IP67 compliant, weather resistant
12VDC & 24VAC dual voltage operation
• 5 year warranty
OSD MENU TREE
PRESET MODE
OUTDOOR
INDOOR
LOW LIGHT
LOBBY
HALLWAY
ELEVATOR
MAIN SETUP
EXPOSURE
B/W
EXTERN
LOW MIDDLE HIGH
SHARPNESS GAMMA MIRROR
FLIP
DAY / NIGHT
COLOR
SPECO DNR
IMAGE
EXIT
BRIGHTNESS
SHUTTER
BACKLIGHT
HLC BLC
WDR
AUTO
AWB COLOR GAIN
ACE DEFOG
SYSTEM
OUTPUT
FREQ.
IMAGE RANGE
INTENSIFY
AGC
COLOR
IRIS
MOTION
FRAME RATE
LANGUAGE COLOR BAR
RESET
CAM TITLE
PRIVACY
FOCUS ADJ
COLOR SPACE
COM.
OSD Joystick
Video Test (CVBS)
Right
Up
Down
Left
OSD CONTROL
Enter
DIMENSIONS
Bottom View
Side View
Optional Accessories
Unit : inch
White Cover
(Included)
Black Cover
(Optional)
INTCM1
(Pole/Corner Mount)
INTWM1
(Wall Mount)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation.
Rev. 231127
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
OSD MENU Details
DAY / NIGHT : Adjust Day / Night options.
COLOR : Always Color mode, Default value for these cameras
B/W : Always B/W mode.
- ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
EXT : please do not use this mode for these cameras
AUTO : Day / Night is switching automatically by AGC level.
- ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
- AGC THRES : Adjusts AGC THRES (0~20)
- AGC MARGIN : Adjusts AGC margin (0~20)
- DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)
COLOR : Adjusts white balancing options.
AWB : it goes to optimized color level automatically.
COLOR GAIN : Sets the desired Color Gain value (0~20)
SPECO DNR : Uses to reduce the background noise in a low luminance
environment with 2D + 3D filtering system.
BACKLIGHT : Adjusts backlight options.
WDR : WDR illuminates darker areas of an image while retaining the
same light level for brighter areas to even out the overall brightness
of images with high contrast between bright and dark area
- Adjusts the WDR Weight (LOW/MIDDLE/HIGH)
* CVBS out cannot adjust this function.
BLC : Produces a clearer image of an object darkened by strong backlighting.
- H-POS : Adjusts the horizontal position(0~20)
- V-POS : Adjusts the Vertical position(0~20)
- H-SIZE : Adjusts the horizontal block size (0~20)
- V-SIZE : Adjusts the vertical block size (0~20)
HLC : Uses to contain extremely bright areas such as from car headlight,
the light can be masked out much of the on-screen details.
IMAGE : Adjusts various image options.
SHARPNESS: Adjusts sharpness level. Increasing this value, the picture
outline becomes stronger and clear. (0~10)
GAMMA : Sets the desired Gamma value. (0.45 ~ 0.75)
MIRROR : Change the video direction horizontally.
FLIP:
Change the video direction perpendicularly.
ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over
saturated areas within the image.
DEFOG : Activated this mode when the video or the weather is foggy.
PRIVACY : Used to hide regions of the image.
MOTION : Adjust motion detection settings.
DET WINDOW
DET TONE
MDRECT FILL
SENSITIVITY : Sets the desired of “Motion” (0~20)
MOTION OSD
TEXT ALARM
SIGNAL OUT
SYSTEM : Adjusts various camera system options.
OUTPUT
MAIN OUTPUT ANALOG OUT0
ANALOG OUT0 TVI
Y GAIN
CB GAIN
CR GAIN
POSITION
BURST FREQ
BURST GAIN
B&W
UCC SELECT
720EX
FRAME RATE: 1080P 30 / 720P 60
FREQ 60Hz
COM.
IMAGE RANGE
COLOR SPACE
COLOR BAR : Manufacturer’s option
LANGUAGE : Sets the desired OSD language
CAM TITLE
RESET: Press with long to reset all settings to factory defaults.
IRIS : ALCas a default value
EXPOSURE : adjusts exposure settings.
BRIGHTNESS : Adjusts image brightness. (0~ 20)
SHUTTER : Outdoor / Indoor / Deblur
INTENSIFY : Sets the desired multiple of the digital exposure length.
AGC(Auto Gain Control): Adjusts the AGC level. (0~10)
Intensifier® Series HD-TVI 1080p 2MP Dome Camera
Wall/Ceiling Mount, UTC, 2BNC out for TVI & CVBS, Dual voltage
HT7246T2 2.8~12mm auto iris lens, dark gray housing

Product Specifications

Brand: Speco Technologies
Category: Not categorized
Model: HT7246T2

Do you need help?

If you need help with Speco Technologies HT7246T2, ask a question below and other users will answer you




Not categorized Speco Technologies User Manuals

Not categorized User Manuals

Latest Not categorized User Manuals