StarTech.com 5G2A1SGBB-USB-C-HUB Manual

Read below 📖 the manual in Italian for StarTech.com 5G2A1SGBB-USB-C-HUB (2 pages) in the Other computer accessories category. This guide has been helpful for 26 people and has been rated 4.5 stars on average by 2 users

Page 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: September 5, 2023 4:59 PM
Product Diagram (Side A)
(Side B)
2-Port USB-C Hub - 2x USB-A (5Gbps), 100W USB PD Pass-through, GbE, RS-232
Component Function
1
Built-In USB Host Cable Built-In USB Host Cable
(USB-C)(USB-C)
Connect to a USB-C Port on a Host Computer or to Tethered
USB-C to USB-A Adapter
USB 3.2 Gen 1 (5Gbps)
2
Tethered USB-C to USB-A
Adapter
Connect to the Built-In USB Host Cable and to a USB-A Port on a
Host Computer
USB 3.2 Gen 1 (5Gbps)
3
RS-232 USB Enumeration RS-232 USB Enumeration
LEDLED
Illuminates Blue to Indicate the RS-232 Functionality of the
USB Hub is in an Operational State
4
RS-232 Transmitter RS-232 Transmitter
LEDLED
Illuminates Yellow to Indicate Outbound RS-232
Transmissions
5
RS-232 Receiver
LED
Illuminates Green to Indicate Inbound RS-232
Transmissions
6
2x Downstream USB Ports
(USB-A)
Connect to a USB Peripheral Device
USB 3.2 Gen 1 (5Gbps)
7
RS-232 Serial Port
(DB-9)
Connect a Serial Peripheral Device
RS-232
8
Gigabit Ethernet Port
(RJ-45)
Connect a CAT 5e/CAT 6 Cable to Establish a Network
Connection
10/100/1000 Mbps
9
100W Power Delivery Pass-
Through Port
(USB-C)
Connect a USB-C Power Adapter
USB Power Delivery 3.0
100W, with Up to 85W Available for Charging
Requirements
USB Enabled Host Computer
Package Contents
USB-C Hub x1
Quick-Start Guide x1
For the latest drivers/software, technical specications, and declarations of conformance,
please visit: www.StarTech.com/5G2A1SGBB-USB-C-HUB
1 2
6 87 9
Product ID
5G2A1SGBB-USB-C-HUB
Pin-Out Diagram (DB-9 Serial Port)
1 5
6 9
Pins Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
5 3
4
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
À DÉPOSER
EN MAGASIN
À DÉPOSER
EN DÉCHÈTERIE
OU
Cet appareil
se recycle
FR
Points de collecte sur www.quefairedemesdechets.fr
Hardware Installation
1. (Optional) Connect the Tethered USB-C to USB-A Adapter to the Built-In USB-C
Host Cable, located on the USB-C Hub.
2. Connect the Built-In USB Cable, located on the USB-C Hub, to an available USB
Port on the Host Computer.
3. Connect USB peripherals the Downstream USB Ports.
4. Connect an RJ-45 terminated network cable (CAT 5e or better) from your local area
network (e.g. Router, Switch, Modem, etc.) to the Gigabit Ethernet Port, located on
the USB-C Hub, to access a network via a wired LAN connection.
5. Connect a USB-C power adapter (up to 100W, sold separately) from an AC outlet to
the 100W Power Delivery Pass-Through Port on the
USB-C Hub, to charge the Host Computer that’s connected to the Built-in USB
Host Cable.
Note: The Host Computer must support USB-C Power Delivery on the
USB-C Port that the USB-C Multiport Adapter is connected to, in order to charge
the computer via USB-C.
6. Connect an RS-232 serial device to the RS-232 Serial Port.
Installation
Software Installation
1. Using a web browser, visit the StarTech.com Product Page for the USB-C Hub by
visiting:
www.StarTech.com/5G2A1SGBB-USB-C-HUB
2. Click the Drivers/Downloads tab on the Product Page.
3. Under Driver(s), download the Driver Package for your operating system.
Windows
1. Right-click the zip folder that was downloaded and select Extract All, then follow the
on-screen instructions.
2. In the list of extracted les, right-click the Setup(.exe) le and select Run as
Administrator.
Note: If the Run as Administrator option is not available, it’s likely that the
installation le is attempting to be ran from within the zipped le. Please extract
the les using the instructions in Step 5.
3. Follow the on-screen prompts to complete the software installation.
macOS
1. Double-click the zip folder that downloaded, macOS will unzip the folder using
Archive Utility.
2. In the list of extracted folders, select the folder that corresponds to your version of
macOS.
3. Double-click the installation package (.dmg le).
4. Follow the on-screen instructions to complete the software installation.

Product Specifications

Brand: StarTech.com
Category: Other computer accessories
Model: 5G2A1SGBB-USB-C-HUB

Do you need help?

If you need help with StarTech.com 5G2A1SGBB-USB-C-HUB, ask a question below and other users will answer you




Other computer accessories StarTech.com User Manuals

Other computer accessories User Manuals

Latest Other computer accessories User Manuals

Digitus

Digitus DA-70327 Manual

15 October 2024
Havis

Havis DS-DELL-405-3 Manual

15 October 2024
Havis

Havis DS-GTC-302-3 Manual

15 October 2024
Havis

Havis PKG-DS-GTC-617 Manual

15 October 2024
Havis

Havis DS-PAN-112-2 Manual

15 October 2024
Havis

Havis DS-PAN-112 Manual

15 October 2024
Havis

Havis DS-DELL-402-3 Manual

15 October 2024
Havis

Havis DS-PAN-412-2 Manual

15 October 2024
Havis

Havis PKG-DS-GTC-619 Manual

15 October 2024