StarTech.com ST121WHDS2 Manual
StarTech.com
AV extender
ST121WHDS2
Read below 📖 the manual in Italian for StarTech.com ST121WHDS2 (2 pages) in the AV extender category. This guide has been helpful for 28 people and has been rated 4.5 stars on average by 2 users
Page 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: March 8, 2024
HDMI Over Wireless Extender - 4K 60Hz - 50m (165ft)
Component Function
1 LED Indicators • Refer to LED Chart
2 Channel Select Button
• Press to change Wireless Channels
• Press and Hold for 5 sec to initiate Pairing
• Press and Hold for 10 sec to Restore Default
Settings
3 Antenna Connectors • Connect the included Wireless Antennas
4 Update Port • Transmitter/Receiver: For manufacturer use only
5 HDMI Input • Connect to an HDMI Source Device
6 HDMI Output • Connect to an HDMI Display
7 IR Output Port • Connect the IR Blaster to the Transmitter
8 DC Power Input • Connect the included Universal Power Adapter
9 IR Input Port • Connect the IR Receiver to the Receiver
Product Information
For the latest product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/ST121WHDS2
Requirements
• HDMI Source Device x 1
• HDMI Display x 1
• HDMI Cables x 2
• (Optional) Local HDMI Display x 1
• (Optional) Phillips Head Screwdriver for Mounting x 1
Package Contents
• Wireless Transmitter x 1
• Wireless Receiver x 1
• IR Blaster x 1
• IR Receiver x 1
• Wireless Antenna x 4
• Universal Power Adapter (NA/EU/UK) x 2
• Mounting Kit x 2
• Set of Rubber Feet x 1
• Quick-Start Guide x 1
Product ID
ST121WHDS2
Transmitter
Receiver
1
2
3 4 5 6 7 8 3
3 4 6 9 8 3
1
2
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
(Optional) Installing the IR Blaster and IR Receiver
Control the HDMI Source Device from the Receiver’s location
1. Connect the IR Blaster (Labelled “IR Out”) to the IR Output Port on the Transmitter.
2. Peel the Film o of the Adhesive Pad that is located on the IR Blaster. Position
the IR Blaster so that it is pointing directly at the IR Sensor on the HDMI Source
Device.
Note: Consult the HDMI Source Device’s manual to determine the location of the IR
Sensor.
3. Connect the IR Receiver (Labelled “IR In”) to the IR Input Port on the Receiver.
4. Peel the Film o of the Adhesive Pad that is located on the IR Receiver. Position the
IR Receiver in a location where there is a clear path to the Remote Control.
5. Use the Remote Control for the HDMI Source Device to control the HDMI Source
Device from the Receiver’s location.
LED Chart
LED Indicator Function
Power Indicator Solid Blue: Unit is Receiving Power
Wireless Connection
Indicator
Solid Orange: Wireless Connection Established
Quick Flash: Wireless Pairing Mode
Slow Flash: Waiting for Wireless Connection
HDMI Signal Transmission
Indicator
Solid Orange: HDMI Signal is transmitting
Quick Flash: Restoring to Default settings
O: No HDMI Signal detected
Installation
(Optional) Mounting Kit
Note: Before mounting the HDMI Extender make sure that the surface you are
mounting to is strong enough to support the HDMI Extender. It is recommended that
the HDMI Extender is mounted on a wall stud to provide the correct support.
1. Determine the Mounting Surface for the Transmitter and Receiver.
2. Place the Mounting Brackets beside the Transmitter and Receiver. Align the Holes in
the Mounting Brackets with the Holes on the sides of the Transmitter and Receiver.
3. Insert two Screws through each Mounting Bracket and into the HDMI Extender.
4. Tighten each Screw using a Phillips Head Screwdriver.
5. Mount the HDMI Extender to the desired Mounting Surface using the appropriate
Mounting Hardware (e.g. Wood Screws).
Install the Transmitter and Receiver
1. Position the Wireless Transmitter and Receiver near the HDMI Source and Display.
2. Connect an HDMI Cable (not included) from the HDMI Source to the HDMI Input
Port on the Wireless Transmitter.
3. (Optional) Connect an HDMI Cable (not included) from the HDMI Output Port on the
Transmitter to an available HDMI Input Port on a Local HDMI Display.
4. Connect an HDMI Cable (not included) from the HDMI Output Port on the Receiver
to an available HDMI Input Port on the Remote HDMI Display.
5. Connect the included Power Adapters from an available Wall Outlet to the
Transmitter and Receiver.
Note: There are only 4 wireless channels available. If there are already 4 paired Extender
Kits in the area, one must be removed/disconnected.
Product Specifications
| Brand: | StarTech.com |
| Category: | AV extender |
| Model: | ST121WHDS2 |
Do you need help?
If you need help with StarTech.com ST121WHDS2, ask a question below and other users will answer you
AV extender StarTech.com User Manuals
15 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
13 October 2024
AV extender User Manuals
- AV extender Extron
- AV extender Lindy
- AV extender Smart-AVI
- AV extender Atlona
- AV extender Rocstor
- AV extender Genexis
- AV extender PureLink
- AV extender Kramer
- AV extender ATen
- AV extender Blustream
- AV extender WyreStorm
- AV extender C2G
- AV extender Intelix
- AV extender Comprehensive
Latest AV extender User Manuals
22 October 2024
22 October 2024
19 October 2024
19 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024
18 October 2024